2963912 Phoenix Contact Electrical Safety Devices

2963912 Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (operation)
  -20 °C ... 55 °C (observe derating)
• Max. permissible humidity (storage/transport)
  75 % (on average, 85% infrequently, non-condensing)
• Inrush current
  2 A (Δt = 10 ms at Us)
• Concurrence
  ∞
• Depth
  114.5 mm
• Maximum altitude
  ≤ 2000 m (Above sea level)
• Typical response time
  < 380 ms (automatic start)
• Ambient temperature (storage/transport)
  -40 °C ... 70 °C
• Rated control supply current IS
  typ. 177 mA AC
• Typ. starting time with Us
  < 500 ms (when controlled via A1)
• Filter time
  2 ms (at A1 in the event of voltage dips at Us)
• Minimum switching voltage
  5 V AC/DC
• Switching capacity (360/h cycles)
  4 A (24 V DC)
• Net weight
  429 g
• Min. degree of protection of inst. location
  IP54
• Connection method
  Screw connection
• Conductor cross section flexible
  0.2 mm² ... 2.5 mm²
• Screw thread
  M3
• Performance level (PL)
  e
Safety Integrity Level Claim Limit (SIL CL)
3
Standards/regulations
DIN EN 50178/VDE 0160
Vibration (operation)
10 Hz ... 150 Hz, 2g
ECLASS 10.0.1
27371819
ECLASS 4.1
40020600
ETIM 3.0
EC001449
UNSPSC 13.2
39121501
Height
99 mm
Rated control circuit supply voltage US
24 V AC/DC -15 % / +10 %
Current consumption
< 50 mA (with Us/Ix to S10)
Typical release time
< 20 ms (when controlled via S11/S12 and S21/S22)
Recovery time
< 1 s
Contact type
8 enabling current paths
Limiting continuous current
6 A (N/O contact, pay attention to the derating)
Maximum interrupting rating (inductive load)
42 W (24 V DC, τ = 40 ms)
Nominal operating mode
100% operating factor
ECLASS 11.0
27371819
ECLASS 9.0
27371819
ETIM 2.0
EC000196
ETIM 7.0
EC001449
UNSPSC 6.01
30211901
UNSPSC 19.0
39122205
UNSPSC 21.0
39122205
Width
45 mm
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Power consumption at US
typ. 4.25 W (AC)
Voltage at input/start and feedback circuit
24 V DC -15 % / +10 %
Protective circuit
Surge protection Suppressor diode and varistors
Maximum switching voltage
250 V AC/DC (Observe the load curve)
Inrush current, minimum
10 mA
Switching capacity min.
50 mW
Mounting position
any
Degree of protection
IP20
ECLASS 6.0
27371800
ETIM 4.0
EC001449
ETIM 6.0
EC001449
UNSPSC 20.0
39122205
Status display
2 x green LEDs
Max. permissible overall conductor resistance
approx. 11 Ω (Input and start circuits at US)
Contact material
AgSnO2
Sq. Total current
50 A2 (observe derating)
Interrupting rating (ohmic load) max.
144 W (24 V DC, τ = 0 ms)
Output fuse
10 A gL/gG (N/O contact)
Housing material
PBT
pluggable
Yes
Stripping length
7 mm
Designation
Air clearances and creepage distances between the power circuits
Category
4
Rated surge voltage/insulation
Basic insulation 4 kV:between all current paths and housingSafe isolation, reinforced insulation 6 kV:between A1/A2 and 63/64, 73/74, 83/84between S10/S11/S12/S33/S34/S35 and 63/64, 73/74, 83/84between 63/64, 73/74, 83/84 among one another
Degree of pollution
2
Shock
15g
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27371900
ECLASS 7.0
27371819
UNSPSC 7.0901
39121501
UNSPSC 18.0
39122205
Operating voltage display
1 x green LED
Maximum switching frequency
0.5 Hz
Maximum inrush current
20 A (Δt  100 ms)
Mechanical service life
10x 106 cycles
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Mounting type
DIN rail mounting
Housing color
yellow
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Conductor cross-section AWG
24 ... 12
Stop category
0
Safety Integrity Level (SIL)
3
Rated insulation voltage
250 V AC
Overvoltage category
III
Conformance
CE-compliant
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
40020600
ECLASS 5.1
27371900
UNSPSC 11
39121501
UNSPSC 12.01
39121501

Product condition