2963941 Phoenix Contact Electrical Safety Devices
Part#:2963941
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Checking verified in-stock parts...
About the product: Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 1- or 2-channel operation, 3 enabling current paths, nominal input voltage: 24 V AC/DC, pluggable Push-in terminal block
About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.
Check out the 2963941 Phoenix Contact price in the box on the right side or send a quick quote.
2963941 Product Details
- Depth 114.5 mm
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Voltage at input/start and feedback circuit approx. 24 V DC
- Concurrence ∞
- Protective circuit Surge protection Suppressor diode
- Minimum switching voltage 15 V AC/DC
- Inrush current, minimum 25 mA
- Switching capacity min. 0.4 W
- Mounting position any
- Housing color yellow
- Conductor cross-section flexible with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Designation Air clearances and creepage distances between the power circuits
- Rated insulation voltage 250 V
- Overvoltage category III
- Vibration (operation) 10 Hz ... 150 Hz, 2g
- ECLASS 11.0 27371819
- Nominal operating mode 100% operating factor
- ECLASS 6.0 27371800
- ETIM 2.0 EC000196
- ETIM 4.0 EC001449
- UNSPSC 12.01 39121501
- UNSPSC 21.0 39122205
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (operation) -20 °C ... 55 °C
- Maximum altitude ≤ 2000 m (Above sea level)
- Typical input current at UN 140 mA AC
- Typical response time 100 ms (automatic start)
- Recovery time 1 s
- Contact material AgSnO2, + 0.2 µm Au
- Maximum inrush current 6 A
- Interrupting rating (ohmic load) max. 144 W (24 V DC, τ = 0 ms)
- Output fuse 10 A gL/gG NEOZED (N/O contact)
- Net weight 221.9 g
- Degree of protection IP20
- Connection method Push-in connection
- Conductor cross section flexible 0.2 mm² ... 1.5 mm²
- Stripping length 8 mm
- Safety Integrity Level (SIL) 3
- Safety Integrity Level Claim Limit (SIL CL) 3
- Rated surge voltage/insulation 4 kV / basic insulation (safe isolation, reinforced insulation, and 6 kV between A1-A2/logic/enabling and signaling current paths)
- ECLASS 10.0.1 27371819
- ECLASS 4.1 40020600
- ETIM 6.0 EC001449
- UNSPSC 18.0 39122205
- Height 112 mm
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Input voltage range in reference to UN 0.85 ... 1.1
- Typical release time 45 ms (single-channel)
- Max. permissible overall conductor resistance approx. 50 Ω (Input and start circuits at UN)
- Limiting continuous current 6 A (N/O contact)
- Sq. Total current 72 A2 (ITH2 = I12 + I22 + I32)
- Mechanical service life approx. 107 cycles
- Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
- Min. degree of protection of inst. location IP54
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- Conductor cross-section flexible with ferrule and plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Stop category 0
- Standards/regulations DIN EN 50178/VDE 0160
- Shock 15g
- REACh SVHC Lead 7439-92-1
- ECLASS 4.0 40020600
- ECLASS 5.1 27371900
- ETIM 3.0 EC001449
- ETIM 7.0 EC001449
- UNSPSC 11 39121501
- UNSPSC 20.0 39122205
- Width 22.5 mm
- Ambient temperature (storage/transport) -40 °C ... 70 °C
- Nominal input voltage UN 24 V AC/DC
- Operating voltage display Green LED
- Status display Green LED
- Contact type 3 enabling current paths
- Maximum switching voltage 250 V AC/DC
- Maximum interrupting rating (inductive load) 48 W (24 V DC, τ = 40 ms)
- Switching capacity (360/h cycles) 6 A (24 V DC)
- Mounting type DIN rail mounting
- pluggable Yes
- Conductor cross-section AWG 24 ... 16
- Performance level (PL) e
- Category 4
- Degree of pollution 2
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 9.0 27371819
- UNSPSC 6.01 30211901
- UNSPSC 13.2 39121501
- ECLASS 5.0 27371900
- ECLASS 7.0 27371819
- UNSPSC 7.0901 39121501
- UNSPSC 19.0 39122205
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Shipping and Delivery Worldwide
calculate cost and time at Checkout
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨