2924809 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2924809
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Programmable temperature transducer with analog output and 3 limit value relays, intrinsically safe signal input, resistance thermometer in 2-, 3-, or 4-conductor technology, thermocouples, electrical isolation, wide-range power supply, Push-in connection
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Measuring & Monitoring Instruments that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2924809 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Width 35 mm
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Degree of protection IP20 (not assessed by UL)
- Sensor types (RTD) that can be used Pt, Ni, Cu sensors: 2, 3, 4-wire
- Vibration (operation) 5g, accordance to IEC 60068-2-6
- Load/output load voltage output ≥ 10 kΩ
- Max. voltage output signal ± 11 V
- Load/output load current output ≤ 600 Ω (at 20 mA)
- Contact material AgSnO2, hard gold-plated
- Supply voltage range 24 V ... 230 V AC/DC (-20 %/+10 %, 50/60 Hz)
- Mechanical service life 1x 105 cycles
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- Conductor cross section flexible 0.2 mm² ... 1.5 mm²
- Interference emission EN 61000-6-4
- Electrical isolation 4-way, between input/output/power supply/switching output
- Max. output power Po 11 mW
- Additional text mixed circuit
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Depth 114.5 mm
- Typical deviation from the measuring range final value 2 %
- UL, USA/Canada UL 508 Listed
- DNV GL-Vibration A
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- REACh SVHC Lead 7439-92-1
- Height 116 mm
- Maximum altitude ≤ 2000 m
- Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
- Sensor types that can be used (TC) B, E, J, K, N, R, S, T, L, U, CA, DA, A1G, A2G, A3G, MG, LG
- Input signal range -1000 mV ... 1000 mV
- Max. current output signal 22 mA
- Output name Relay output
- Housing material PA 6.6-FR
- Max. internal capacitance Ci 44 nF
- Max. external capacitance Co 21 µF
- Noise emission EN 61000-6-4
- DNV GL-EMC A
- Stripping length 8 mm
- Maximum transmission error 0.1 % (e.g. for Pt 100, 300 K span, 4 ... 20 mA)
- Degree of pollution 2
- Color gray
- Test voltage 2.5 kV AC (50 Hz, 1 min.)
- Max. output current Io 7.4 mA
- Standards/regulations EN 61000-4-6
- DNV GL-Humidity B
- Temperature B
- ECLASS 10.0.1 27210129
- ECLASS 5.1 27200206
- ETIM 4.0 EC001596
- UNSPSC 6.01 30211506
- UNSPSC 21.0 41112105
- Permissible humidity (operation) typ. 5 % ... 95 % (non-condensing)
- Shock 15g, according to IEC 60068-2-27
- Temperature measuring range -250 °C ... 2500 °C (Range depending on the sensor type)
- Current output signal 4 mA ... 20 mA (in the case of SIL; further free configuration without SIL)
- Potentiometer resistance range 0 Ω ... 50 kΩ
- Behavior in the event of a sensor error according to NE 43 or freely configurable
- Contact type 3 changeover contacts
- Maximum switching voltage 250 V AC (250 V DC)
- Power consumption < 2.4 W
- Conductor cross section AWG 24 ... 16
- Status display Green LED (supply voltage, PWR)
- Overvoltage category II
- Designation INMETRO
- Max. output voltage Uo 6 V
- Ambient temperature (operation) -20 °C ... 65 °C
- Maximum temperature coefficient 0.01 %/K
- Step response (0–99%) typ. 1000 ms (With SIL)
- Electromagnetic compatibility Conformance with EMC directive
- Rated insulation voltage 300 Vrms
- Max. internal inductance Li negligible
- Safety-related maximum voltage Um 253 V AC/DC
- IECEx [Ex ia Ga] IIC
- DNV GL-Temperature B
- Certificate DNV 18.0143 X
- DNV GL-Enclosure Required protection according to the Rules shall be provided upon installation on board
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 6.0 27371500
- ECLASS 5.0 27371500
- UNSPSC 7.0901 39121008
- UNSPSC 13.2 39121008
- UNSPSC 18.0 41112105
- ECLASS 4.1 27210107
- UNSPSC 12.01 39121008
- UNSPSC 20.0 41112105
- Insulation Safe isolation in accordance with IEC/EN 61010-1
- Identification [Ex ia Ga] IIC
- ECLASS 11.0 27210129
- ECLASS 4.0 27210107
- Typical current consumption < 100 mA (24 V DC)
- Group IIC
- EMC A
- ECLASS 7.0 27371503
- ETIM 7.0 EC002568
- UNSPSC 19.0 41112105
- Connection method Push-in connection
- Max. external inductivity Lo 1 mH
- Vibration A
- ECLASS 9.0 27210129
- Humidity B
- Maximum inrush current 2 A (250 V AC)
- ATEX II (1) G [Ex ia Ga] IIC
- Conformance CE-compliant
- ETIM 6.0 EC002568
- UNSPSC 11 39121008
- ETIM 3.0 EC001446
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
