2924799 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2924799
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: Programmable temperature transducer with analog output and 3 limit value relays, intrinsically safe signal input, resistance thermometer in 2-, 3-, or 4-conductor technology, thermocouples, electrical isolation, wide-range power supply, Push-in connection
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Measuring & Monitoring Instruments that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2924799 Phoenix Contact price in the box on the right side or send a quick quote.
2924799 Product Details
- Stripping length 8 mm
- Conductor cross section AWG 24 ... 16
- Status display Green LED (supply voltage, PWR)
- Electromagnetic compatibility Conformance with EMC directive
- Designation INMETRO
- Max. internal inductance Li negligible
- Power consumption < 2.4 W
- Overvoltage category II
- Electrical isolation 4-way, between input/output/power supply/switching output
- Conformance CE-compliant
- Temperature B
- REACh SVHC Lead 7439-92-1
- Max. output current Io 7.4 mA
- Typical deviation from the measuring range final value 2 %
- ECLASS 5.0 27200200
- ECLASS 7.0 27200206
- Maximum switching voltage 250 V AC (250 V DC)
- Maximum temperature coefficient 0.01 %/K
- Step response (0–99%) typ. 1000 ms (With SIL)
- Color gray
- Rated insulation voltage 300 Vrms
- Supply voltage range 24 V ... 230 V AC/DC (-20 %/+10 %, 50/60 Hz)
- Maximum transmission error 0.1 % (e.g. for Pt 100, 300 K span, 4 ... 20 mA)
- Degree of pollution 2
- Housing material PA 6.6-FR
- Insulation Safe isolation in accordance with IEC/EN 61010-1
- Typical current consumption < 100 mA (24 V DC)
- Connection method Push-in connection
- Conductor cross section flexible 0.2 mm² ... 1.5 mm²
- Interference emission EN 61000-6-4
- Test voltage 2.5 kV AC (50 Hz, 1 min.)
- Max. external inductivity Lo 1 mH
- UL, USA/Canada UL 508 Listed
- DNV GL-Humidity B
- ECLASS 4.1 27200200
- ETIM 3.0 EC001446
- Height 116 mm
- Maximum altitude ≤ 2000 m
- Permissible humidity (operation) typ. 5 % ... 95 % (non-condensing)
- Sensor types that can be used (TC) B, E, J, K, N, R, S, T, L, U, CA, DA, A1G, A2G, A3G, MG, LG
- Temperature measuring range -250 °C ... 2500 °C (Range depending on the sensor type)
- Voltage input signal -1 V ... 1 V
- Max. current output signal 22 mA
- Mechanical service life 1x 105 cycles
- Additional text mixed circuit
- UNSPSC 21.0 41112105
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- DNV GL-Enclosure Required protection according to the Rules shall be provided upon installation on board
- Load/output load voltage output ≥ 10 kΩ
- Output name Relay output
- Behavior in the event of a sensor error according to NE 43 or freely configurable
- Vibration A
- Depth 114.5 mm
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
- Shock 15g, according to IEC 60068-2-27
- Sensor types (RTD) that can be used Pt, Ni, Cu sensors: 2, 3, 4-wire
- Configurable/programmable no
- Width 35 mm
- Degree of protection IP20 (not assessed by UL)
- Vibration (operation) 5g, accordance to IEC 60068-2-6
- Max. voltage output signal ± 11 V
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (operation) -20 °C ... 65 °C
- Input signal range -1000 mV ... 1000 mV
- DNV GL-Vibration A
- Contact type 3 changeover contacts
- Max. external capacitance Co 21 µF
- DNV GL-EMC A
- Current output signal 4 mA ... 20 mA (in the case of SIL; further free configuration without SIL)
- Load/output load current output ≤ 600 Ω (at 20 mA)
- Max. internal capacitance Ci 44 nF
- ATEX II (1) G [Ex ia Ga] IIC
- Identification [Ex ia Ga] IIC
- ECLASS 10.0.1 27210129
- ECLASS 6.0 27200200
- ETIM 2.0 EC001446
- UNSPSC 6.01 30211506
- UNSPSC 12.01 39121008
- Max. output voltage Uo 6 V
- Group IIC
- IECEx [Ex ia Ga] IIC
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 5.1 27200200
- ECLASS 9.0 27210129
- UNSPSC 7.0901 39121008
- Potentiometer resistance range 0 Ω ... 50 kΩ
- Contact material AgSnO2, hard gold-plated
- Max. output power Po 11 mW
- Standards/regulations EN 61000-4-6
- DNV GL-Temperature B
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- ECLASS 11.0 27210129
- ETIM 4.0 EC001446
- UNSPSC 13.2 41112105
- Maximum inrush current 2 A (250 V AC)
- Noise emission EN 61000-6-4
- ETIM 6.0 EC002919
- EMC A
- UNSPSC 20.0 41112105
- Humidity B
- ECLASS 4.0 27200200
- ETIM 7.0 EC002919
- Safety-related maximum voltage Um 253 V AC/DC
- UNSPSC 19.0 41112105
- Certificate DNV 18.0143 X
- UNSPSC 11 39121008
- UNSPSC 18.0 41112105
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
2924799
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨