2924074 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2924074
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Ex i NAMUR isolating amplifier For operating proximity sensors and switches in Ex areas. The signals are transmitted via 2 transistor outputs (passive) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Measuring & Monitoring Instruments that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2924074 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Switching output 2 transistor outputs, passive
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Depth 114.5 mm
- Maximum altitude ≤ 2000 m
- Noise immunity EN 61000-6-2
- Short-circuit current ~ 8 mA
- Minimum switching voltage 3 V DC
- Width 12.5 mm
- Permissible humidity (operation) 10 % ... 95 % (non-condensing)
- Signal input Intrinsically safe
- Line fault detection Break 0.05 mA < IIN < 0.35 mA
- Nominal supply voltage 24 V DC
- Power dissipation ≤ 800 mW
- Connection method Push-in connection
- Degree of pollution 2
- Housing material PA 6.6-FR
- Rated insulation voltage 50 Vrms
- Insulation Basic insulation in accordance with IEC/EN 61010-1
- Max. output power Po 25 mW
- UNSPSC 12.01 39121008
- Ambient temperature (operation) -20 °C ... 60 °C (Any mounting position)
- Switching points (unattenuated) > 2.1 mA (conductive)
- Available input sources NAMUR proximity sensors (EN 60947-5-6)
- Switching hysteresis < 0.2 mA
- Max. switching current 50 mA (short-circuit-proof)
- Power consumption ≤ 800 mW
- Conductor cross section flexible 0.2 mm² ... 1.5 mm²
- Color gray
- Max. internal inductance Li negligible
- Max. output current Io 10 mA
- Standards/regulations GB 3626.20
- UL, USA/Canada Class I Div 2; IS for Class I, II, III Div 1
- DNV GL-EMC B
- Vibration A
- REACh SVHC Lead 7439-92-1
- ECLASS 4.1 27210100
- ECLASS 6.0 27210100
- ECLASS 9.0 27210121
- ETIM 6.0 EC001485
- UNSPSC 19.0 39121008
- Height 116 mm
- Degree of protection IP20 (not assessed by UL)
- Switching points (attenuated) < 1.2 mA (blocking)
- Maximum switching voltage 30 V DC
- Supply voltage range 19.2 V DC ... 30 V DC (24 V DC -20%...+25%)
- Conductor cross section AWG 24 ... 16
- No. of channels 1
- Electromagnetic compatibility Conformance with EMC directive
- Safety Integrity Level (SIL) 2
- Max. internal capacitance Ci 1.1 nF
- Safety-related maximum voltage Um 253 V AC (125 V DC)
- Conformance CE-compliant, additionally EN 61326
- IECEx [Ex ia Ga] IIC
- Certificate DNV 18.0141 X
- EMC B
- ECLASS 11.0 27210121
- ECLASS 5.0 27210100
- ETIM 3.0 EC001485
- UNSPSC 11 39121008
- UNSPSC 18.0 39121008
- UNSPSC 20.0 39121008
- Ambient temperature (storage/transport) -40 °C ... 80 °C
- Non-load voltage ~ 8 V DC
- Min. contact current 5 mA (short-circuit-proof)
- Switching frequency ≤ 5 kHz
- Stripping length 8 mm
- Status display Green LED (supply voltage)
- Designation INMETRO
- Group IIC
- Max. external capacitance Co 1 µF
- Evaluation criterion A
- DNV GL-Humidity B
- DNV GL-Vibration A
- UNSPSC 13.2 39121008
- Max. current consumption < 28 mA (24 V DC)
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- Overvoltage category II
- Interference emission EN 61000-6-4
- Electrical isolation 375 V (Peak value in accordance with IEC/EN 60079-11)
- Test voltage 1 kV AC (50 Hz, 1 min.)
- Max. output voltage Uo 9.6 V
- Max. external inductivity Lo 10 µH
- ATEX II (1) G [Ex ia Ga] IIC
- DNV GL-Enclosure Required protection according to the Rules shall be provided upon installation on board
- Humidity B
- China RoHS Environmentally Friendly Use Period = 50 years
- ETIM 2.0 EC001485
- UNSPSC 7.0901 39121008
- UNSPSC 21.0 39121008
- ECLASS 7.0 27210121
- UNSPSC 6.01 30211506
- Identification [Ex ia Ga] IIC
- ECLASS 4.0 27210100
- ECLASS 5.1 27210100
- Noise emission EN 61000-6-4
- Temperature B
- ECLASS 10.0.1 27210121
- ETIM 4.0 EC001485
- Additional text and EN 61326
- ETIM 7.0 EC001485
- DNV GL-Temperature B
- Enclosure Required protection according to the Rules shall be provided upon installation on board
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
