2924045 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2924045
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Ex i NAMUR signal conditioner. For operating proximity sensors and switches in a potentially explosive area. The signals are transmitted by a relay output (changeover contact) to a safe area. Line fault detection (LFD), 3-way isolation, SIL 2.
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Measuring & Monitoring Instruments that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2924045 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Width 12.5 mm
- Ambient temperature (operation) -20 °C ... 60 °C (Any mounting position)
- Degree of protection IP20 (not assessed by UL)
- Short-circuit current ~ 8 mA
- Contact material AgSnO2, hard gold-plated
- Switching output Relay output
- Power dissipation < 650 mW
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- Status display Green LED (supply voltage)
- Degree of pollution 2
- Insulation Safe isolation in accordance with IEC/EN 61010-1
- Safe Failure Fraction (SFF) 78 %
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Permissible humidity (operation) 10 % ... 95 % (non-condensing)
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Noise immunity EN 61000-6-2 EN 61326
- Signal input Intrinsically safe
- Maximum switching voltage 250 V AC (2 A)
- Switching frequency ≤ 20 Hz (without load)
- Max. current consumption 21 mA (24 V DC)
- Stripping length 8 mm
- Designation EAC Ex
- λDD 6 x 10-9 (6 FIT)
- λSD 1 x 10-9 (1 FIT)
- Max. output voltage Uo 9.6 V
- Safety-related maximum voltage Um 253 V AC (125 V DC)
- DNV GL-EMC B
- Height 116 mm
- Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)
- Switching points (unattenuated) > 2.1 mA (conductive)
- Contact type 1 changeover contact
- Mechanical service life 107 cycles
- Power consumption < 650 mW
- Conductor cross section AWG 24 ... 16
- Electrical isolation 375 V (Peak value in accordance with IEC/EN 60079-11)
- Color gray
- Integrity requirement IEC 61508 - Low demand
- λDU 6.2 x 10-8 (62 FIT)
- Max. internal inductance Li negligible
- Max. output power Po 25 mW
- Additional text and EN 61326
- IECEx [Ex ia Ga] IIC
- DNV GL-Enclosure Required protection according to the Rules shall be provided upon installation on board
- Temperature B
- Depth 114.5 mm
- Maximum altitude ≤ 2000 m
- Non-load voltage ~ 8 V DC
- Available input sources NAMUR proximity sensors (EN 60947-5-6)
- Switching hysteresis < 0.2 mA
- Nominal supply voltage 24 V DC
- Conductor cross section flexible 0.2 mm² ... 1.5 mm²
- Housing material PA 6.6-FR
- Rated insulation voltage 300 Vrms
- Overvoltage category II
- Safety Integrity Level (SIL) 2
- Probability of a hazardous failure on demand (PFDAVG) 3.01 x 10-4 (1 year)
- Max. external capacitance Co 1 µF
- DNV GL-Vibration A
- Max. internal capacitance Ci 11 nF
- Max. output current Io 10 mA
- Conformance CE-compliant, additionally EN 61326
- UL, USA/Canada Class I Div 2; IS for Class I, II, III Div 1
- Identification [Ex ia Ga] IIC
- Humidity B
- ECLASS 10.0.1 27210121
- ECLASS 4.1 27210100
- ETIM 2.0 EC001485
- UNSPSC 6.01 30211506
- ETIM 7.0 EC001485
- UNSPSC 18.0 39121008
- Maximum switching capacity 500 VA
- Group IIC
- EMC B
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 9.0 27210121
- UNSPSC 19.0 39121008
- No. of channels 1
- Equipment type Type A
- Max. external inductivity Lo 10 µH
- ATEX II (1) G [Ex ia Ga] IIC
- DNV GL-Temperature B
- Vibration A
- REACh SVHC Lead 7439-92-1
- ECLASS 11.0 27210121
- ECLASS 6.0 27210100
- ETIM 4.0 EC001485
- UNSPSC 7.0901 39121008
- UNSPSC 11 39121008
- Switching points (attenuated) < 1.2 mA (blocking)
- Connection method Push-in connection
- DNV GL-Humidity B
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- ECLASS 4.0 27210100
- ECLASS 7.0 27210121
- ETIM 3.0 EC001485
- UNSPSC 12.01 39121008
- UNSPSC 20.0 39121008
- Line fault detection Break 0.05 mA < IIN < 0.35 mA
- Supply voltage range 19.2 V DC ... 30 V DC (24 V DC -20%...+25%)
- Test voltage 2.5 kV AC (50 Hz, 1 min.)
- λSU 2.48 x 10-7 (248 FIT)
- Diagnostic coverage (DC) DCS = 0.4 %, DCD = 8 %
- Standards/regulations GB 3626.20
- Certificate RU C-DE.AB72.B.00093/19
- ECLASS 5.0 27210100
- ECLASS 5.1 27210100
- ETIM 6.0 EC001485
- UNSPSC 13.2 39121008
- UNSPSC 21.0 39121008
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
