2924016 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2924016
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Ex i repeater power supply and input signal conditioner, HART. Transmits supplied or active 0/4 - 20 mA signals from the hazardous area to a load (active or passive) in the safe area. 3-way electrical isolation; SIL 2 according to IEC 61508, with push-in
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Measuring & Monitoring Instruments that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2924016 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Overvoltage category II
- Ambient temperature (operation) -20 °C ... 60 °C (Any mounting position)
- Permissible humidity (operation) 10 % ... 95 % (non-condensing)
- Degree of protection IP20 (not assessed by UL)
- Signal output Current output (active and passive)
- Output behavior in the event of an error 0 mA (Cable break in the input)
- Power dissipation < 0.75 W (24 V DC / 20 mA / 1000 Ω)
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- Temperature coefficient, typical < 0.004 %/K
- Color gray
- Electrical isolation 375 V (Peak value in accordance with IEC/EN 60079-11)
- Width 12.5 mm
- Maximum altitude ≤ 2000 m
- Current input signal 0 mA ... 20 mA
- Polarization and surge protection Yes
- Output ripple < 20 mVrms
- Max. internal inductance Li negligible
- Standards/regulations GB 3626.20
- ATEX II (1) G [Ex ia Ga] IIC
- DNV GL-Humidity B
- EMC A
- UNSPSC 7.0901 39121008
- Stripping length 8 mm
- Connection name Test socket
- Maximum temperature coefficient < 0.01 %/K
- Status display Green LED (supply voltage)
- Housing material PA 6.6-FR
- Insulation Safe isolation in accordance with IEC/EN 61010-1
- Integrity requirement IEC 61508 - High demand
- Safety Integrity Level (SIL) 2
- Max. output voltage Uo 25.2 V
- UNSPSC 18.0 39121008
- Max. external capacitance Co 820 nF
- No. of channels 1
- Interference emission EN 61000-6-4
- Electromagnetic compatibility Conformance with EMC directive
- Test voltage 2.5 kV AC (50 Hz, 1 min.)
- λDU 5 x 10-8 (50 FIT)
- λSD 0
- Probability of a hazardous failure per hour (PFHD) 4,99 x 10-8
- Safety-related maximum voltage Um 253 V AC (125 V DC)
- UNSPSC 12.01 39121008
- UNSPSC 6.01 30211506
- Height 116 mm
- Depth 114.5 mm
- Transmitter supply voltage > 16 V (20 mA)
- Current output signal 0 mA ... 20 mA (active)
- Nominal supply voltage 24 V DC
- Power consumption < 1.8 W (20 mA / 1000 Ω)
- Conductor cross section AWG 24 ... 16
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Signal input Passive current input, intrinsically safe
- Transmission Behavior 1:1 to input signal
- Designation INMETRO
- Max. current consumption < 44 mA (24 V DC / 20 mA / 1000 Ω)
- UNSPSC 21.0 39121008
- Input voltage Ui ≤ 30 V
- Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
- Load/output load current output < 1000 Ω (20 mA)
- Degree of pollution 2
- ETIM 7.0 EC002653
- UNSPSC 11 39121008
- UNSPSC 20.0 39121008
- Noise emission EN 61000-6-4
- DNV GL-Vibration A
- Certificate DNV 18.0136 X
- Ambient temperature (storage/transport) -40 °C ... 80 °C
- Voltage drop < 3.5 V (in input isolating amplifier operation)
- Connection method Push-in connection
- Underload/overload signal range 0 mA ... 24 mA (Extended transmission range for diagnostics)
- Probability of a hazardous failure on demand (PFDAVG) 2.40 x 10-4 (1 year)
- Max. external inductivity Lo 4 mH
- Safe Failure Fraction (SFF) 90.7 %
- Max. output current Io 93 mA
- Group IIC
- Maximum transmission error < 0.1 % (of final value)
- HART function Yes
- Max. output power Po 587 mW
- Conformance CE-compliant, additionally EN 61326
- DNV GL-Temperature B
- DNV GL-EMC A
- DNV GL-Enclosure Required protection according to the Rules shall be provided upon installation on board
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- ECLASS 11.0 27210120
- ETIM 4.0 EC002653
- Max. diameter 2 mm
- Conductor cross section flexible 0.2 mm² ... 1.5 mm²
- Transmission error, typical < 0.05 % (of final value)
- Step response (10-90%) < 200 µs (for jump 4 mA ... 20 mA, load 600 Ω)
- λSU 4.867 x 10-7 (486.7 FIT)
- Equipment type Type A
- λDD 0
- Diagnostic coverage (DC) DCS=0 %, DCD=0 %
- Additional text and EN 61326
- Max. internal capacitance Ci negligible
- UL, USA/Canada UL 61010 Listed
- Temperature B
- Vibration A
- ECLASS 10.0.1 27210120
- ECLASS 5.0 27210100
- ECLASS 5.1 27210100
- ETIM 6.0 EC002653
- UNSPSC 13.2 39121008
- Supply voltage range 19.2 V DC ... 30 V DC (24 V DC -20%...+25%)
- Protocols supported HART
- Operation Signal conditioner operation
- Input current Ii ≤ 150 mA
- IECEx [Ex ia Ga] IIC
- Identification [Ex ia Ga] IIC/IIB
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 6.0 27210100
- ECLASS 7.0 27210120
- ECLASS 9.0 27210120
- UNSPSC 19.0 39121008
- Rated insulation voltage 300 Vrms
- Typical deviation from the measuring range final value 1 %
- Humidity B
- REACh SVHC Lead 7439-92-1
- ECLASS 4.0 27210100
- ECLASS 4.1 27210100
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
