2909575 Phoenix Contact AC/DC Power Supplies
Part#:2909575
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Checking verified in-stock parts...
About the product: Primary-switched power supply unit, QUINT POWER, Push-in connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 1.3 A
About the category: AC/DC power supplies are power supplies that convert alternating current from the grid into direct current that is needed to power most electronics. AC/DC power supplies are integral components in systems that make the world go round.
About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.
Check out the 2909575 Phoenix Contact price in the box on the right side or send a quick quote.
2909575 Product Details
- Height 106 mm
- Degree of protection IP20
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Current consumption 0.46 A (100 V AC)
- Input fuse 3.15 A (slow-blow, internal)
- Connection in series yes
- Output power 30 W
- Environmental protection directive RoHS Directive 2011/65/EU
- Efficiency typ. 89.2 % (120 V AC)
- Assembly instructions DIN rail mounting
- Standard - Electrical safety IEC 61010-2-201 (SELV)
- EMC requirements for noise emission EN 61000-6-3
- Standard – Safety extra-low voltage IEC 61010-1 (SELV)
- Contact discharge 8 kV (Test Level 4)
- Flicker EN 61000-3-3
- Electromagnetic HF field EN 61000-4-3
- Conducted interference EN 61000-4-6
- Additional text Test Level 2
- Inflammability class in acc. with UL 94 (housing / terminal blocks) V0
- Input voltage range 100 V AC ... 240 V AC -15 % ... +10 %
- Inrush current typ. 5.9 A (at 25 °C)
- Type of protection Transient surge protection
- Static Boost (IStat.Boost) 1.625 A (≤ 40 °C)
- Feedback voltage resistance ≤ 35 V DC
- Control deviation < 0.5 % (Static load change 10 % ... 90 %)
- MTBF (IEC 61709, SN 29500) > 1904000 h (25 °C)
- Conductor cross section solid min. 0.2 mm²
- Conductor cross section AWG min. 24
- Standard - Safety of transformers EN 61558-2-16
- Conducted noise emission EN 55016
- Electrostatic discharge EN 61000-4-2
- Output 1 kV (Test Level 3 - symmetrical)
- Signal 0.5 kV (Test Level 2 - symmetrical)
- Frequency 60 Hz
- Number of periods 0.5 / 1 / 5 / 50 periods
- China RoHS Environmentally Friendly Use Period = 25;
- ECLASS 7.0 27049002
- Depth 90 mm
- Degree of pollution 2
- Installation height ≤ 5000 m (> 2000 m, observe derating)
- Protective circuit/component Varistor
- Dynamic Boost (IDyn.Boost) 2.6 A (≤ 60 °C (5 s))
- Connection in parallel Yes, for redundancy and increased capacity
- Residual ripple < 40 mVPP (with nominal values)
- Net weight 0.188 kg
- Insulation voltage input/output 4 kV AC (type test)
- Conductor cross section flexible max. 2.5 mm²
- Stripping length 10 mm
- Standard - safety for equipment for measurement, control, and laboratory use IEC 61010-1
- Standard – Limitation of mains harmonic currents EN 61000-3-2
- SIQ CB-Scheme (IEC 61010-1, IEC 61010-2-201)
- Harmonic currents EN 61000-3-2
- Frequency range 50 Hz ... 60 Hz
- Comments Criterion A
- Surge voltage load (surge) EN 61000-4-5
- Voltage dips EN 61000-4-11
- Pulse-shape magnetic field EN 61000-4-9
- Attenuated sinusoidal oscillations (ring wave) EN 61000-4-12
- Width 22.5 mm
- Installation distance top/bottom 30 mm / 30 mm
- Ambient temperature (start-up type tested) -40 °C
- Climatic class 3K3 (in acc. with EN 60721)
- Frequency range (fN) 50 Hz ... 60 Hz -10 % ... +10 %
- Nominal power consumption 37 VA
- Nominal output voltage 24 V DC
- Setting range of the output voltage (USet) 24 V DC ... 28 V DC (constant capacity)
- Typical response time 500 ms
- Power loss nominal load max. < 3.7 W (120 V AC)
- Protection class II
- Conductor cross section solid max. 2.5 mm²
- Conductor cross section AWG max. 14
- Standard - Safe isolation IEC 61558-2-16
- UL approvals UL Listed UL 61010-1
- Noise emission EN 55016
- Discharge in air 8 kV (Test Level 3)
- Fast transients (burst) EN 61000-4-4
- I/O/S asymmetrical
- Power frequency magnetic field EN 61000-4-8
- Test level 2 16.67 Hz 50 Hz 60 Hz (Test Level 4)
- REACh SVHC Lead 7439-92-1
- ECLASS 5.1 27242213
- ETIM 7.0 EC002540
- UNSPSC 21.0 39121004
- Installation distance right/left 0 mm / 0 mm
- Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
- Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing)
- Dielectric strength maximum 300 V AC 30 s
- Discharge current to PE < 0.25 mA (264 V AC, 60 Hz)
- Mains buffering time typ. 43 ms (120 V AC)
- Nominal output current (IN) 1.3 A
- Derating > 60 °C (2.5%/K)
- Protection against overvoltage at the output (OVP) ≤ 32 V DC
- Maximum power dissipation in no-load condition < 0.4 W (230 V AC)
- Connection method Push-in connection
- Conductor cross section flexible min. 0.2 mm²
- EMC requirements for noise immunity EN 61000-6-1
- Standard - power supply devices for low voltage with DC output EN 61204-3
- Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
- Test field strength 1000 A/m
- Input 2 kV (symmetrical)
- Voltage 300 V (1 s)
- Voltage dip 0 %
- Test level 1 16.67 Hz 50 Hz 60 Hz (Test Level 2)
- Criterion A Normal operating behavior within the specified limits.
- ECLASS 11.0 27040701
- ECLASS 6.0 27049000
- UNSPSC 20.0 39121004
- Asymmetrical conducted disturbance variables EN 61000-4-16
- Criterion B Temporary impairment to operational behavior that is corrected by the device itself.
- ECLASS 10.0.1 27040701
- ETIM 6.0 EC002540
- UNSPSC 18.0 39121004
- Criterion C Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
- ECLASS 9.0 27040701
- UNSPSC 19.0 39121004
- UNSPSC 13.2 39121004
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Shipping and Delivery Worldwide
calculate cost and time at Checkout
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨