2909531 Phoenix Contact Relays
Part#:2909531
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with Push-in connection and plug-in relay with 10 A power contact, 1 changeover contact, 12 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Di
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Relays that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2909531 Phoenix Contact price in the box on the right side or send a quick quote.
2909531 Product Details
- Width 14 mm
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Typical response time 8 ms
- Type of switch contact Single contact
- Contact material AgNi
- Maximum switching voltage 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
- Interrupting rating (ohmic load) max. bridged 144 W (for 24 V DC. Value applies to connections 12. If connections 12 are bridged, the normal value applies.)
- Mechanical service life 3x 107 cycles
- Connection name Contact side
- Conductor cross section flexible 0.14 mm² ... 2.5 mm²
- Insulation Safe isolation, reinforced insulation
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 6.0 27371600
- UNSPSC 7.0901 39121515
- UNSPSC 11 39121515
- UNSPSC 20.0 39122334
- ETIM 6.0 EC001437
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (operation) -20 °C ... 60 °C (UL)
- Nominal input voltage UN 12 V DC
- Contact type 1 changeover contact
- Minimum switching voltage 12 V AC/DC
- Limiting continuous current 10 A
- Switching capacity 2 A (at 24 V, DC13)
- Mounting position any
- Connection method Push-in connection
- Designation Corrosive gas test
- Rated surge voltage 6 kV
- Pollution degree 2
- ECLASS 11.0 27371601
- ECLASS 5.1 27371600
- ETIM 4.0 EC001437
- UNSPSC 12.01 39121515
- UNSPSC 21.0 39122334
- Depth 94 mm
- Typical release time 10 ms
- Operating voltage display Yellow LED
- Power dissipation for nominal condition 0.4 W
- Interrupting rating (ohmic load) max. 240 W (at 24 V DC)
- Test voltage 4 kV AC (50 Hz, 1 min., winding/contact)
- Flammability rating according to UL 94 V0 (Housing)
- Conductor cross section solid 0.14 mm² ... 2.5 mm²
- Conductor cross section AWG 26 ... 14
- Rated insulation voltage 250 V AC
- Certificate IECEx IBE 16.0029X
- ECLASS 9.0 27371601
- UNSPSC 6.01 30211916
- UNSPSC 18.0 39122334
- Height 80 mm
- Degree of protection RT III (Relay)
- Typical input current at UN 33 mA
- Protective circuit Reverse polarity protection Polarity protection diode
- Min. switching current 100 mA
- Maximum inrush current 30 A (300 ms)
- Operating mode 100% operating factor
- Assembly instructions In rows with zero spacing
- Stripping length 8 mm
- Standards/regulations IEC 60664
- Overvoltage category III
- ECLASS 5.0 27371600
- ETIM 2.0 EC001437
- ETIM 3.0 EC001437
- UNSPSC 13.2 39122334
- UNSPSC 19.0 39122334
- Identification ISA-S71.04. G3 Harsh Group
- ECLASS 10.0.1 27371601
- ECLASS 7.0 27371601
- ETIM 7.0 EC001437
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
2909531
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨