2906232 Phoenix Contact Electrical Measuring & Monitoring Instruments

2906232 Product Details

• Height
  110.5 mm
• Measuring coil degree of protection
  IP67 (not assessed by UL)
• Power consumption
  ≤ 1 W (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)
• Configurable/programmable
  Via DIP switches
• Output voltage (sinusoidal, in no-load operation)
  100 mV (VOUT = 2 * π * M * f * I (M = 0.318 μH; example: At 50 Hz; I = 1,000 A))
• Basic accuracy
  <± 0.2 %
• Conductor cross section flexible
  0.2 mm² ... 1.5 mm²
• Torque
  0.5 Nm ... 0.6 Nm
• REACh SVHC
  Lead 7439-92-1
• ECLASS 4.1
  27210900
• ETIM 6.0
  EC002048
• ECLASS 7.0
  27210902
• UNSPSC 18.0
  39121032
• Ambient temperature (operation)
  -30 °C ... 80 °C (Measuring coil)
• Nominal supply voltage
  24 V DC
• Linearity error
  < 0.1 %
• Input signal (at 50 Hz)
  100 mV (1000 A)
• Current output signal
  0 mA ... 20 mA (via DIP switch)
• Diameter of measuring coil
  8.3 mm ±0.2 mm
• Standards/regulations
  IEC 61010-1
UL, USA/Canada
UL 508 Listed
Screw thread
M3
Electromagnetic compatibility
Conformance with EMC Directive 2004/108/EC
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
ECLASS 5.1
27210900
ECLASS 5.0
27210900
ECLASS 11.0
27210902
UNSPSC 20.0
39121032
Ambient temperature (storage/transport)
-40 °C ... 80 °C (Measuring coil)
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Frequency measuring range
40 Hz ... 20000 Hz
Output signal (at 50 Hz)
100 mV (no load, at 1,000 A)
Output voltage (in no-load operation)
VOUT = M * dI/dt
Conductor structure signal line
2x 0.22 mm (Signal (tinned))
Test voltage
3 kV (50 Hz, 1 min.)
Conductor cross section AWG
26 ... 16
Noise emission
EN 61000-6-4
China RoHS
Environmentally Friendly Use Period = 50 years
Designation
CE
Depth
120.5 mm
Measuring transducer degree of protection
IP20
Position error
<± 1 % (typical)
Measuring ranges (current)
100 A 250 A 400 A 630 A 1000 A 1500 A 2000 A 4000 A
Input impedance
> 100 kΩ
Load/output load current output
≤ 600 Ω (20 mA)
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Overvoltage category
II
Pollution degree
2
Conformance
CE-compliant
ECLASS 10.0.1
27210902
ETIM 3.0
EC002048
ETIM 4.0
EC002048
Width
6.2 mm
Maximum altitude
> 4000 m
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Nominal supply voltage range
9.6 V DC ... 30 V DC
Voltage output signal
0 V ... 10 V (via DIP switch)
Coil material
Elastollan
Identification
CE-compliant
ECLASS 4.0
27210900
ECLASS 9.0
27210902
ETIM 7.0
EC002048
UNSPSC 21.0
39121032
ECLASS 6.0
27210900
UNSPSC 19.0
39121032
UNSPSC 13.2
39121032
Length of measuring coil
450 mm
Frequency range
16 Hz ... 1000 Hz
Connection method
Screw connection
Housing material
PBT
Maximum transmission error
≤ 0.5 % (From the range end value)
Stripping length
10 mm
Rated insulation voltage
300 V
Typical measuring error
< 1 %
Length of signal cable
3000 mm
Connection name
Measuring transducer side
Insulation
double insulation

Product condition