Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

Live support:

Monday - Friday 6AM - 6PM PST

2905662 Phoenix Contact Relays

Phoenix Contact 2905662 Pre-assembled relay module with screw connection, consisting of: relay base, relay retaining bracket, plug-in interference suppression module, and power contact relay with test button and integrated status LED. Contact type: 2 changeover contacts. Input v
Phoenix Contact

Part#:2905662

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: Pre-assembled relay module with screw connection, consisting of: relay base, relay retaining bracket, plug-in interference suppression module, and power contact relay with test button and integrated status LED. Contact type: 2 changeover contacts. Input v

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 2905662 Phoenix Contact price in the box on the right side or send a quick quote.

2905662 Product Details

  • Stripping length
    8 mm
  • Width
    16 mm
  • Depth
    75 mm
  • Typical input current at UN
    4.5 mA
  • Operating voltage display
    Yellow LED
  • Maximum switching voltage
    250 V AC/DC
  • Maximum inrush current
    16 A (20 ms, N/O contacts)
  • Switching capacity min.
    120 mW
  • Mounting position
    any
  • Connection method
    Screw connection
  • Conductor cross section flexible
    0.5 mm² ... 4 mm²
  • Ambient temperature (operation)
    -40 °C ... 45 °C
  • Input voltage range in reference to UN
    see diagram
  • Typical response time
    4 ms ... 12 ms
  • Coil voltage
    230 V AC
  • Type of switch contact
    Single contact
  • Switching capacity
    1 A (at 24 V, DC13)
  • Test voltage
    4 kVrms (50 Hz, 1 min., winding/contact)
  • Connection name
    Contact side
  • Assembly instructions
    In rows with zero spacing
  • Conductor cross section flexible (2 conductors with same cross section)
    0.5 mm² ... 2.5 mm²
  • Insulation
    safe isolation
  • Identification
    ISA-S71.04. G3 Harsh Group
  • ECLASS 5.1
    27371600
  • ETIM 2.0
    EC001437
  • UNSPSC 13.2
    39122334
  • Nominal input voltage UN
    230 V AC (50/60 Hz)
  • Degree of protection
    IP20 (Relay base)
  • Protective circuit
    Varistor
  • Contact material
    AgNi
  • Minimum switching voltage
    12 V (at 10 mA)
  • Limiting continuous current
    see diagram
  • Flammability rating according to UL 94
    V2 (Housing)
  • Service life, electrical
    see diagram
  • Conductor cross-section solid (2 conductors with same cross section)
    0.5 mm² ... 2.5 mm²
  • Torque
    0.5 Nm ... 0.6 Nm
  • Rated surge voltage
    6 kV
  • Designation
    Corrosive gas test
  • ECLASS 11.0
    27371601
  • ECLASS 5.0
    27371600
  • ETIM 7.0
    EC001437
  • UNSPSC 21.0
    39122334
  • UNSPSC 18.0
    39122334
  • Utilization restriction
    EMC: class A product, see manufacturer's declaration in the download area
  • Height
    89 mm
  • Ambient temperature (storage/transport)
    -40 °C ... 85 °C
  • Mains frequency
    50/60 Hz
  • Typical release time range
    4 ms ... 20 ms
  • Contact type
    2 changeover contacts
  • Min. switching current
    10 mA (at 12 V)
  • Interrupting rating (ohmic load) max.
    192 W (at 24 V DC)
  • Operating mode
    100% operating factor
  • Mechanical service life
    approx. 5x 106 cycles
  • Conductor cross section solid
    0.5 mm² ... 4 mm²
  • Conductor cross section AWG
    20 ... 10 (solid)
  • Pollution degree
    2
  • Rated insulation voltage
    250 V AC
  • China RoHS
    Environmentally friendly use period: unlimited = EFUP-e
  • ECLASS 6.0
    27371600
  • ECLASS 7.0
    27371601
  • ETIM 6.0
    EC001437
  • ETIM 4.0
    EC001437
  • UNSPSC 20.0
    39122334
  • Standards/regulations
    DIN EN 50178
  • Overvoltage category
    III
  • ECLASS 10.0.1
    27371601
  • ECLASS 9.0
    27371601
  • ETIM 3.0
    EC001437
  • UNSPSC 19.0
    39122334

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo