2905628 Phoenix Contact Electrical Measuring & Monitoring Instruments

2905628 Product Details

• Color
  gray
• Height
  109.81 mm
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Width
  6.2 mm
• Description of the input
  Current input (sensor circuit)
• Number of inputs
  1
• Input resistance current input
  90 Ω (+1.6 V)
• Mounting position
  any
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Maximum altitude
  ≤ 2000 m
• Output name
  Current output
• Degree of pollution
  2
• Housing material
  PBT
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 2
• Temperature
  B
• Enclosure
  Required protection according to the Rules shall be provided upon installation on board
• ECLASS 11.0
  27210120
• ECLASS 6.0
  27210100
• Depth
  119.2 mm
• Degree of protection
  IP20 (not assessed by UL)
Screw thread
M3
Overvoltage category
II
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Noise emission
EN 61000-6-4
Standards/regulations
EN 61000-4-6
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Step response (10-90%)
< 400 µs (typ.)
Electromagnetic compatibility
Conformance with EMC directive
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Certificate
DNV GL TAA000021E
Current input signal
4 mA ... 20 mA (Power supply and signal duplicator mode)
Ripple
< 20 mVPP (at 500 Ω)
Conductor cross section AWG
24 ... 12 (flexible)
Stripping length
10 mm
Limit frequency (3 dB)
approx. 1 kHz
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Number of outputs
2
ETIM 7.0
EC002653
Nominal supply voltage
24 V DC
Vibration
A
Load/output load current output
≤ 500 Ω (per channel)
Transmission Behavior
1:1 to input signal
Torque
0.5 Nm ... 0.6 Nm
Designation
Shipbuilding approval
ECLASS 4.0
27210100
ECLASS 10.0.1
27210120
ETIM 4.0
EC002653
ECLASS 7.0
27210120
Identification
UL 508 Listed
Ambient temperature (operation)
-40 °C ... 70 °C
Current output signal
4 mA ... 20 mA (Power supply and signal duplicator mode)
Typical current consumption
40 mA (For 24 V DC and in signal duplicator mode)
Conductor cross section solid
0.2 mm² ... 1.5 mm² (with ferrule)
Rated insulation voltage
300 V
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Humidity
B
REACh SVHC
Lead 7439-92-1
ECLASS 9.0
27210120
ETIM 6.0
EC002653
EMC
A
No. of channels
2
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
ECLASS 5.0
27210100
Max. output current
25 mA
Power consumption
1.6 W (at IOUT = 20 mA, 500 Ω load)
Connection method
Screw connection
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Maximum temperature coefficient
0.0075 %/K
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27210100
ECLASS 5.1
27210100
Transmitter supply voltage
> 19.5 V
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Maximum transmission error
0.05 % (of final value)

Product condition