2905632 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2905632
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Checking verified in-stock parts...
About the product: Universally configurable temperature limit value switch with N/O relay output for the connection of 2, 3, and 4-conductor resistance thermometers and thermocouples. Configurable via DIP switch or software, screw connection technology
About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.
Check out the 2905632 Phoenix Contact price in the box on the right side or send a quick quote.
2905632 Product Details
- Depth 119.2 mm
- Permissible humidity (operation) 5 % ... 95 % (non-condensing)
- Connection technology 2-, 3-, 4-conductor
- Output name Relay output
- Min. switching current 100 mA (12 V DC)
- Max. switching current 6 A AC (250 V AC)
- Maximum temperature coefficient 0.01 %/K
- Status display Yellow LED (switching output)
- Electromagnetic compatibility Conformance with EMC directive
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2
- Vibration A
- EMC A
- ECLASS 11.0 27210122
- ECLASS 7.0 27210122
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Height 109.81 mm
- Maximum altitude ≤ 2000 m
- Available input sources Thermocouples
- Contact material AgSnO2, hard gold-plated
- Supply voltage range 9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
- Stripping length 10 mm
- Conductor cross section solid 0.2 mm² ... 1.5 mm² (with ferrule)
- Mounting position any
- Assembly instructions The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
- China RoHS Environmentally Friendly Use Period = 50 years
- Ambient temperature (operation) -40 °C ... 70 °C
- Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
- Setting range of the response delay 0 s ... 10 s (can be set freely via software)
- Width 6.2 mm
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Linear resistance measuring range 0 Ω ... 4000 Ω
- Maximum switching voltage 250 V AC
- Limiting continuous current 6 A AC
- Connection method Screw connection
- Conductor cross section AWG 24 ... 12 (flexible)
- Overvoltage category II
- Color gray
- Identification UL 508 Listed
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- ECLASS 4.0 27210100
- ECLASS 5.0 27210100
- ETIM 6.0 EC002654
- Degree of protection IP20 (not assessed by UL)
- Sensor input current approx. 200 µA
- Sensor types that can be used (TC) B, E, J, K, N, R, S, T, L, U, A-1, A-2, A-3, M, L
- Contact type 1 N/O contact
- Nominal supply voltage 24 V DC
- Power consumption 570 mW
- No. of channels 1
- Test voltage, input/output/supply 3 kV (50 Hz, 1 min.)
- Noise emission EN 61000-6-4
- Temperature B
- REACh SVHC Lead 7439-92-1
- ECLASS 10.0.1 27210122
- ECLASS 9.0 27210122
- Sensor types (RTD) that can be used Pt, Ni, Cu sensors
- Max. permissible overall conductor resistance ≤ 25 Ω (Per line, RTD in 3- or 4-conductor technology)
- Linear mV signal range -500 mV ... 500 mV
- Mechanical service life 2x 107 cycles
- Typical current consumption 44 mA (12 V DC)
- Screw thread M3
- Torque 0.5 Nm ... 0.6 Nm
- Electrical isolation Reinforced insulation in accordance with IEC 61010-1
- Degree of pollution 2
- Housing material PBT
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2
- Designation Shipbuilding approval
- Humidity B
- ECLASS 6.0 27210100
- ETIM 7.0 EC002654
- Internal hysteresis can be set freely via software
- Conductor cross section flexible 0.14 mm² ... 2.5 mm²
- Switching point accuracy < 0.1 %
- Rated insulation voltage 300 V
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2
- Certificate DNV GL TAA000021E
- ETIM 4.0 EC002654
- ECLASS 4.1 27210100
- ECLASS 5.1 27210100
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Shipping and Delivery Worldwide
calculate cost and time at Checkout
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨