2903321 Phoenix Contact Relays

2903321 Product Details

• Height
  89 mm
• Mains frequency
  50/60 Hz
• Typical release time range
  5 ms ... 20 ms
• Depth
  75 mm
• ETIM 2.0
  EC001437
• Ambient temperature (operation)
  -40 °C ... 50 °C
• Protective circuit
  Varistor
• Coil voltage
  230 V AC
• Maximum switching voltage
  250 V AC/DC
• Operating mode
  100% operating factor
• Connection method
  Screw connection
• Insulation
  Basic insulation
• ECLASS 10.0.1
  27371601
• ECLASS 5.0
  27371600
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Nominal input voltage UN
  230 V AC
• Contact type
  2 changeover contacts
• Interrupting rating (ohmic load) max.
  204 W (at 24 V DC)
• Flammability rating according to UL 94
  V2 (Housing)
Mechanical service life
approx. 2x 107 cycles
Conductor cross section flexible
0.5 mm² ... 4 mm²
Torque
0.5 Nm ... 0.6 Nm
Pollution degree
2 (Rated voltage of 230/400 V)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 7.0
27371601
ETIM 6.0
EC001437
UNSPSC 18.0
39122334
Width
27 mm
Degree of protection
IP20 (Relay base)
Typical response time
5 ms ... 15 ms
Contact material
AgNi
Min. switching current
5 mA (at 24 V)
Limiting continuous current
8.5 A (see diagram)
Connection name
Contact side
Conductor cross section AWG
20 ... 10 (solid)
Designation
Corrosive gas test
ECLASS 5.1
27371600
ECLASS 9.0
27371601
UNSPSC 20.0
39122334
Input voltage range in reference to UN
see diagram
Typical input current at UN
6.5 mA
Operating voltage display
Yellow LED
Maximum inrush current
30 A (20 ms, N/O contacts)
Test voltage
2.5 kVrms (50 Hz, 1 min., winding/contact)
Mounting position
any
Stripping length
8 mm
Conductor cross-section solid (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
Standards/regulations
DIN EN 50178
Rated insulation voltage
250 V AC
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 4.0
27371100
ECLASS 6.0
27371600
ETIM 4.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 19.0
39122334
Type of switch contact
Single contact
Minimum switching voltage
5 V (At 24 mA)
Switching capacity
2 A (at 24 V, DC13)
Assembly instructions
In rows with zero spacing
Conductor cross section solid
0.5 mm² ... 4 mm²
Conductor cross section flexible (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
Rated surge voltage
4 kV
Overvoltage category
III
ECLASS 11.0
27371601
ECLASS 4.1
27371100
ETIM 3.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 11
39121515
UNSPSC 13.2
39122334
ETIM 7.0
EC001437
UNSPSC 12.01
39121515
UNSPSC 21.0
39122334

Product condition