2903302 Phoenix Contact Relays

2903302 Product Details

• Depth
  90 mm
• Mains frequency
  50/60 Hz
• Maximum switching voltage
  250 V AC/DC
• Limiting continuous current
  7 A (see diagram)
• Flammability rating according to UL 94
  V2 (Housing)
• Width
  40 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (operation)
  -40 °C ... 50 °C
• Degree of protection
  IP20 (Relay base)
• Coil voltage
  120 V AC
• Minimum switching voltage
  10 V (At 24 mA)
• Test voltage
  2.5 kVrms (50 Hz, 1 min., winding/contact)
• Connection name
  Contact side
• Conductor cross-section solid (2 conductors with same cross section)
  0.5 mm² ... 2.5 mm²
• Torque
  0.5 Nm ... 0.6 Nm
• Conductor cross section flexible
  0.5 mm² ... 4 mm²
• Insulation
  Basic insulation
• ECLASS 11.0
  27371601
• ECLASS 6.0
  27371600
ETIM 3.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 21.0
39122334
Input voltage range in reference to UN
see diagram
Min. switching current
10 mA (at 24 V)
Interrupting rating (ohmic load) max.
168 W (at 24 V DC)
Conductor cross section solid
0.5 mm² ... 4 mm²
Conductor cross section AWG
20 ... 10 (solid)
Rated surge voltage
4 kV
ECLASS 4.1
27371100
ECLASS 7.0
27371601
ETIM 4.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 12.01
39121515
Typical response time
5 ms ... 15 ms
Operating voltage display
Yellow LED
Switching capacity
2 A (at 24 V, DC13)
Maximum inrush current
30 A (20 ms, N/O contacts)
Assembly instructions
In rows with zero spacing
Overvoltage category
III
ECLASS 5.1
27371600
ECLASS 9.0
27371601
UNSPSC 7.0901
39121515
UNSPSC 18.0
39122334
UNSPSC 20.0
39122334
Typical input current at UN
23 mA
Height
96 mm
Nominal input voltage UN
120 V AC
Typical release time range
5 ms ... 20 ms
Contact type
2 changeover contacts
Mounting position
any
Stripping length
8 mm
Rated insulation voltage
250 V AC
ECLASS 10.0.1
27371601
ECLASS 5.0
27371600
ETIM 2.0
EC001437
ETIM 7.0
EC001437
Type of switch contact
Single contact
Contact material
AgNi
Mechanical service life
approx. 2x 107 cycles
Standards/regulations
DIN EN 50178
Pollution degree
2
Identification
ISA-S71.04. G3 Harsh Group
Designation
Corrosive gas test
ECLASS 4.0
27371100
ETIM 6.0
EC001437
UNSPSC 19.0
39122334
Protective circuit
Varistor
Operating mode
100% operating factor
Connection method
Screw connection
Conductor cross section flexible (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
UNSPSC 11
39121515

Product condition