2903283 Phoenix Contact Relays

2903283 Product Details

• ECLASS 4.0
  27371100
• ECLASS 5.0
  27371600
• ETIM 7.0
  EC001437
• UNSPSC 18.0
  39122334
• UNSPSC 21.0
  39122334
• Width
  44 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Mains frequency
  50/60 Hz
• Typical release time range
  5 ms ... 20 ms
• Contact type
  3 N/O contacts
• Minimum switching voltage
  10 V (At 24 mA)
• Limiting continuous current
  8 A (see diagram)
• Motor load according to UL 508
  1/3 HP, 120 V AC (single-phase AC motor)
• Mechanical service life
  approx. 107 cycles
• Connection method
  Screw connection
• Conductor cross section flexible
  0.5 mm² ... 4 mm²
• Torque
  0.5 Nm ... 0.6 Nm
• Rated insulation voltage
  250 V AC
• Designation
  Corrosive gas test
• Identification
  ISA-S71.04. G3 Harsh Group
ECLASS 5.1
27371600
ETIM 4.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 13.2
39122334
Height
96 mm
Nominal input voltage UN
120 V AC
Typical input current at UN
24 mA
Coil voltage
120 V AC
Contact material
AgNi
Min. switching current
10 mA (at 24 V)
Test voltage
2.5 kVrms (50 Hz, 1 min., winding/contact)
Mounting position
any
Stripping length
8 mm
Conductor cross section flexible (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
Rated surge voltage
4 kV
Pollution degree
2
ECLASS 10.0.1
27371601
ECLASS 6.0
27371600
ETIM 2.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 20.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Depth
91 mm
Degree of protection
IP20 (Relay base)
Typical response time
5 ms ... 25 ms
Operating voltage display
Yellow LED
Maximum switching voltage
440 V AC
Interrupting rating (ohmic load) max.
216 W (at 24 V DC)
Operating mode
100% operating factor
Connection name
Contact side
Conductor cross section solid
0.5 mm² ... 4 mm²
ECLASS 11.0
27371601
ECLASS 9.0
27371601
ETIM 6.0
EC001437
UNSPSC 12.01
39121515
Ambient temperature (operation)
-40 °C ... 40 °C
Input voltage range in reference to UN
see diagram
Protective circuit
Varistor
Type of switch contact
Single contact
Maximum inrush current
50 A (20 ms, N/O contacts)
Switching capacity
1 A (at 24 V, DC13)
Flammability rating according to UL 94
V2 (Housing)
Assembly instructions
In rows with zero spacing
Conductor cross-section solid (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
Conductor cross section AWG
20 ... 10 (solid)
Standards/regulations
DIN EN 50178
Insulation
Basic insulation
Overvoltage category
III
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27371100
ECLASS 7.0
27371601
ETIM 3.0
EC001437
UNSPSC 11
39121515
UNSPSC 19.0
39122334

Product condition