2903000 Phoenix Contact AC/DC Power Supplies

2903000 Product Details

• Installation distance right/left
  0 mm / 0 mm
• Ambient temperature (operation)
  -25 °C ... 70 °C (> 55 °C Derating: 2.5 %/K)
• Degree of pollution
  2
• Nominal input voltage range
  100 V AC ... 240 V AC
• Power factor (cos phi)
  0.49
• Nominal output current (IN)
  2 A (-25 °C ... 55 °C)
• Connection in series
  yes
• Control deviation
  < 1 % (change in load, static 10 % ... 90 %)
• MTBF (IEC 61709, SN 29500)
  > 911000 h (40 °C)
• Housing material
  Polycarbonate
• Assembly instructions
  alignable: 0 mm horizontally, 30 mm vertically
• Conductor cross section flexible max.
  2.5 mm²
• Standard - Safety of transformers
  EN 61558-2-16
• Standard – Safety extra-low voltage
  IEC 62368-1 (SELV) und EN 60204-1 (PELV)
• CSA
  CAN/CSA-C22.2 No. 60950-1-07
• Discharge in air
  8 kV (Test Level 3)
• Input
  2 kV (Test Level 3 - symmetrical)
• Voltage dips
  EN 61000-4-11
• Installation distance top/bottom
  30 mm / 30 mm
• Climatic class
  3K3 (in acc. with EN 60721)
Frequency range (fN)
50 Hz ... 60 Hz 10 %
Inrush current
< 30 A (typical)
Nominal output voltage
15 V DC ±1 %
Connection in parallel
Yes, for redundancy and increased capacity
Output power
30 W
Net weight
0.15 kg
Connection method
Screw connection
Conductor cross section AWG min.
24
Standard - Electrical safety
IEC 62368-1/VDE 0805 (SELV)
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Electrostatic discharge
EN 61000-4-2
Contact discharge
6 kV (Test Level 3)
Comments
Criterion A
Test field strength
10 V/m
China RoHS
Environmentally Friendly Use Period = 25;
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ETIM 6.0
EC002540
UNSPSC 12.01
39121004
UNSPSC 21.0
39121004
Depth
84 mm
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Nominal power consumption
70.8 VA
Recommended breaker for input protection
6 A ... 16 A (Characteristics B, C, D, K)
Derating
55 °C ... 70 °C (2.5%/K)
Feedback voltage resistance
< 25 V DC
Typical response time
< 1 s
Efficiency
typ. 85 % (120 V AC)
Foot latch material
POM (Polyoxymethylen)
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
14
Screw thread
M3
Mains variation/undervoltage
EN 61000-4-11
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Fast transients (burst)
EN 61000-4-4
Criterion A
Normal operating behavior within the specified limits.
ECLASS 11.0
27040701
ECLASS 6.0
27049000
ECLASS 9.0
27040701
ETIM 3.0
EC001039
UNSPSC 13.2
39121004
Width
22.5 mm
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Input voltage range
85 V AC ... 264 V AC
Mains buffering time
> 20 ms (120 V AC)
Protective circuit/component
Varistor
Residual ripple
< 40 mVPP (with nominal values)
Power loss nominal load max.
< 4.6 W
Insulation voltage input/output
4 kV AC (type test)
Conductor cross section solid min.
0.2 mm²
Stripping length
8 mm
Standard - Safe isolation
DIN VDE 0100-410
UL approvals
UL/C-UL listed UL 508
Electromagnetic HF field
EN 61000-4-3
Surge voltage load (surge)
EN 61000-4-5
Output
1 kV (Test Level 2 - symmetrical)
Conducted interference
EN 61000-4-6
ECLASS 4.0
27040700
ETIM 7.0
EC002540
UNSPSC 6.01
30211502
UNSPSC 7.0901
39121004
Height
90 mm
Degree of protection
IP20
Current consumption
0.8 A (100 V AC)
Input fuse
2 A (slow-blow, internal)
Type of protection
Transient surge protection
Protection against overvoltage at the output (OVP)
≤ 25 V DC
Maximum power dissipation in no-load condition
< 0.3 W
Protection class
II (in closed control cabinet)
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section solid max.
2.5 mm²
EMC requirements for noise immunity
EN 61000-6-1
EMC requirements for noise emission
EN 61000-6-3
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Frequency range
10 kHz ... 80 MHz
Voltage
10 V (Test Level 3)
ECLASS 4.1
27040700
ECLASS 5.0
27049000
ETIM 4.0
EC000599
UNSPSC 18.0
39121004
UNSPSC 19.0
39121004
ECLASS 10.0.1
27040701
ECLASS 5.1
27049000
ECLASS 7.0
27049002
UNSPSC 11
39121004
UNSPSC 20.0
39121004

Product condition