2900457 Phoenix Contact Relays

2900457 Product Details

• Width
  6.2 mm
• Typical release voltage
  80 V AC
• Protective circuit
  Bridge rectifier Bridge rectifier
• Maximum switching voltage
  253 V AC (Partition plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal points in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
• Voltage drop at max. limiting continuous current
  < 1 V AC
• Max. load value
  4.5 A2s
• Color
  gray
• Assembly instructions
  In rows with zero spacing
• Conductor cross section AWG
  26 ... 14
• ECLASS 10.0.1
  27371603
• ECLASS 11.0
  27371603
• ECLASS 4.0
  27371000
• ECLASS 7.0
  27371603
• ETIM 2.0
  EC001456
• UNSPSC 6.01
  30211917
• UNSPSC 12.01
  39121516
• Depth
  94 mm
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Nominal input voltage UN
  120 V AC
• Fitting of components
  OPT-60DC/230AC/1
Min. switching current
1 mA (at 24 V)
Note
If the specified maximum values are exceeded, the gold plating is destroyed. The maximum values of the power contact relay are then valid. This can result in a shorter service life than with a pure power contact.
Leakage current
< 1 mA
Mounting position
any
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Connection in acc. with standard
CUL
Designation
Corrosive gas test
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 5.1
27371600
ETIM 4.0
EC001456
ETIM 3.0
EC001456
Height
80 mm
Input voltage range in reference to UN
0.78 ... 1.14
Compatible components
Miniature relay, REL-MR-60DC/21AU, REL-MR-60DC/21; miniature optocoupler, OPT-60DC/48DC/100, OPT-60DC/24DC/2, OPT-60DC/230AC/1
Minimum switching voltage
24 V AC
Switching capacity min.
100 µW
Phase angle cos phi min
0.5
Flammability rating according to UL 94
V0 (Housing)
Stripping length
10 mm
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27371000
ECLASS 6.0
27371600
ETIM 7.0
EC001456
UNSPSC 13.2
39122326
UNSPSC 18.0
39122335
UNSPSC 21.0
39122335
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Contact type
Single contact, 1 N/O contact
Maximum inrush current
30 A (10 ms)
Interrupting rating (ohmic load) max.
1.2 W (at 24 V DC)
Ambient temperature (operation)
-40 °C ... 55 °C
Status display
LED
Contact material
AgSnO, hard gold-plated
Limiting continuous current
0.75 A
Output circuit
2-conductor, floating
Operating mode
100% operating factor
Connection method
Push-in connection
Connection name
Output side
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27371600
ECLASS 9.0
27371603
ETIM 6.0
EC001456
UNSPSC 11
39121516
UNSPSC 19.0
39122335
UNSPSC 7.0901
39121516
UNSPSC 20.0
39122335

Product condition