2900387 Phoenix Contact Relays

2900387 Product Details

• Height
  80 mm
• Nominal input voltage UN
  220 V DC
• Typical input current at UN
  3 mA
• Type of protection
  Reverse polarity protection
• Limiting continuous current
  1 A (see derating curve)
• Flammability rating according to UL 94
  V0 (Housing)
• Rated surge voltage
  2.5 kV
• REACh SVHC
  Lead 7439-92-1
• ECLASS 10.0.1
  27371604
• ECLASS 6.0
  27371600
• ETIM 3.0
  EC001504
• UNSPSC 12.01
  39121542
• UNSPSC 21.0
  39122326
• Width
  6.2 mm
• Ambient temperature (operation)
  -25 °C ... 60 °C
• Switching threshold "1" signal in reference to UN
  ≥ 0.8
• Protective circuit/component
  Polarity protection diode
• Voltage drop at max. limiting continuous current
  < 500 mV
• Connection name
  Output side
• Connection in acc. with standard
  CUL
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 5.1
27371000
ETIM 6.0
EC001504
UNSPSC 7.0901
39121542
UNSPSC 19.0
39122326
Input voltage range in reference to UN
0.8 ... 1.2
Operating voltage display
Yellow LED
Power dissipation for nominal condition
1.23 W
Operating mode
100% operating factor
Connection method
Push-in connection
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Rated insulation voltage
300 V
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27371000
ECLASS 9.0
27371604
ETIM 4.0
EC001504
UNSPSC 11
39121542
UNSPSC 20.0
39122326
Depth
86 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Switching threshold "0" signal in reference to UN
≤ 0.4
Typical turn-off time
1.4 ms
Designation
Corrosive gas test
Mounting position
any
Stripping length
8 mm
Standards/regulations
IEC 60664
Insulation
Basic insulation
Pollution degree
2
ECLASS 4.0
27371100
ECLASS 4.1
27371100
ETIM 2.0
EC001504
UNSPSC 6.01
30211916
UNSPSC 13.2
39122326
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Input voltage range
176 V DC ... 264 V DC
Typical response time
0.4 ms
Transmission frequency
50 Hz
Output voltage range
12 V DC ... 300 V DC (Partition plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal points in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Assembly instructions
In rows with zero spacing
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Conductor cross section AWG
26 ... 14
Overvoltage category
III
ECLASS 11.0
27371604
ECLASS 7.0
27371604
ETIM 7.0
EC001504
UNSPSC 18.0
39122326

Product condition