2900351 Phoenix Contact Relays

2900351 Product Details

• Depth
  94 mm
• Width
  14 mm
• Degree of protection
  IP20 (Relay base)
• Input voltage range in reference to UN
  0.7 ... 1.25
• Coil voltage
  60 V DC
• Minimum switching voltage
  12 V AC/DC
• Note
  the following values are applicable if a gold layer is destroyed
• Flammability rating according to UL 94
  V0 (Housing)
• Connection method
  Push-in connection
• Conductor cross section AWG
  26 ... 14
• Pollution degree
  2
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 11.0
  27371601
• Height
  80 mm
• Typical release time
  11 ms
• Power dissipation for nominal condition
  0.5 W
• Contact type
  2 changeover contacts
• Maximum inrush current
  15 A (300 ms)
• Mechanical service life
  approx. 3x 107 cycles
• Mounting position
  any
Connection in acc. with standard
CUL
Overvoltage category
III
ECLASS 10.0.1
27371601
ECLASS 7.0
27371601
UNSPSC 6.01
30211916
UNSPSC 18.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Typical input current at UN
4.5 mA
Operating voltage display
Yellow LED
Min. switching current
10 mA
Switching capacity
2 A (at 24 V, DC13)
Assembly instructions
In rows with zero spacing
Connection name
Contact side
Rated surge voltage
6 kV
Insulation
Basic insulation
ECLASS 4.0
27371000
ETIM 3.0
EC001437
UNSPSC 11
39121515
UNSPSC 20.0
39122334
Ambient temperature (operation)
-40 °C ... 70 °C (Temperature class TX)
Nominal input voltage UN
110 V DC
Type of switch contact
Single contact
Maximum switching voltage
250 V AC/DC (Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules.)
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Operating mode
100% operating factor
Stripping length
8 mm
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Rated insulation voltage
250 V AC
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 4.1
27371000
ETIM 2.0
EC001437
ETIM 6.0
EC001437
UNSPSC 12.01
39121515
Typical response time
5 ms
Protective circuit
Bridge rectifier Bridge rectifier
Contact material
AgNi, hard gold-plated
Limiting continuous current
2x 6 A (see derating curve)
Test voltage
5 kVrms (50 Hz, 1 min., winding/contact)
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Standards/regulations
EN 50155 (VDE 0115 part 200)
Designation
Corrosive gas test
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27371600
ECLASS 5.1
27371600
ETIM 4.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 21.0
39122334
ECLASS 6.0
27371600
ECLASS 9.0
27371601
ETIM 7.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 19.0
39122334

Product condition