2884208 Phoenix Contact Programmable Logic Controllers
Part#:2884208
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 21
Nov 24, 2024
Wireless-MUX set, two modules with 16 digital inputs and outputs and 2 analog inputs and outputs (0 ... 20 mA, 0 ... 10 V) each, incl. omnidirectional antennas with 1.5 m cableWireless-MUX set, two modules with 16 digital inputs and outputs and 2 analog
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Programmable Logic Controllers that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2884208 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Modulation type GFSK (Gaussian Frequency Shift Keying)
- Input name Analog inputs
- Protective circuit Short-circuit protection, overload protection, protected against reverse voltages
- Note on dimensions with connectors
- Degree of protection IP20
- Frequency range 0.15 MHz ... 80 MHz
- Nominal load, lamp 12 W
- Reverse voltage resistance to short pulses Reverse voltage proof
- Input resistance of voltage input 130 kΩ
- Mounting type DIN rail
- Housing material PA 6.6-FR
- Delay time ≤ 10 ms (Latency, typical)
- Identification Japan MIC (RF) ID:202-LSF002
- ECLASS 4.0 27250300
- Input voltage range "0" signal < 5 V
- Behavior with overload Auto restart
- ECLASS 9.0 27242602
- UNSPSC 7.0901 20142601
- UNSPSC 12.01 20142601
- Depth 57 mm
- Permissible humidity (operation) 95 % (non-condensing)
- Air pressure (operation) 795 hPa ... 1080 hPa (up to 2000 m above sea level)
- Receiver sensitivity -95 dBm
- Current consumption 60 mA (Communications power at 24 V DC, 25 °C)
- Voltage input signal 0 V ... 10 V
- Measured value resolution 12 bits
- Voltage output signal 0 V ... 10 V
- MTBF 465 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
- Diagnostics messages Short-circuit or overload of the digital outputs LED
- Certificate MSIP-CRI-PCK-2884208
- ECLASS 7.0 27242602
- ETIM 6.0 EC001597
- UNSPSC 21.0 32151602
- UNSPSC 13.2 20142601
- Wireless standard Based on Bluetooth 4.0
- Type of protection Transient protection
- Number of outputs 2
- Nominal load, inductive 12 VA (1.2 H, 50 Ω)
- Behavior with inductive overload Output can be destroyed
- Height 123.4 mm
- Permissible humidity (storage/transport) 95 %
- No. of channels 40
- DAC resolution 12 Bit
- Load/output load current output ≤ 500 Ω
- Net weight 885 g
- Degree of pollution 2
- Wireless licenses Europe, additional countries in the e-shop
- Mechanical tests Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g, 10...150 Hz, 2.5 h, in XYZ direction
- ECLASS 6.0 27242600
- ETIM 3.0 EC001599
- UNSPSC 11 20142601
- UNSPSC 20.0 32151602
- Connection method Spring-cage connection
- Transmission power 5 dBm
- Connection technology 1-conductor
- Typical input current per channel 2.3 mA
- Nominal output voltage 24 V DC
- Width 95 mm
- Air pressure (storage/transport) 66 kPa ... 108 kPa (up to 3500 m above sea level)
- Output current 8 A (Total)
- Description of the input Single ended
- Input resistance current input 50 Ω
- Current output signal 0 mA ... 20 mA
- Note on weight specifications one module, incl. connector, without antenna
- Switch-on time ≤ 3 s (Until the wireless connection is established)
- ETIM 4.0 EC001599
- UNSPSC 6.01 20142601
- UNSPSC 18.0 32151602
- UNSPSC 19.0 32151602
- Antenna connection method RSMA (female)
- Supply voltage 24 V DC
- Supply voltage range 19.2 V DC ... 30.5 V DC (via power connector)
- Input voltage range "1" signal > 15 V
- Output name Analog outputs
- Output current when switched off ≤ 10 µA (When not loaded, a voltage can be measured even at an output that is not set.)
- Nominal load, ohmic 12 W (48 Ω)
- Current input signal 0 mA ... 20 mA
- Load/output load voltage output ≥ 2 kΩ
- Color green
- MTTF 1458 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
- Additional text ISC directive RSS 210
- Number of inputs 2
- Input frequency ≤ 10 Hz
- ETIM 7.0 EC001597
- Ambient temperature (storage/transport) -25 °C ... 85 °C
- Nominal input voltage UIN 24 V DC
- ETIM 2.0 EC001430
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (operation) -25 °C ... 60 °C
- Designation Wireless approval South Korea, KC
- Free from substances that could impair the application of coating according to P-VW 3.10.7 57 65 0 VW-AUDI-Seat central standard
- Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
- Indirect discharge ± 6 kV
- ECLASS 4.1 27250300
- REACh SVHC Lead 7439-92-1
- ECLASS 5.0 27250600
- Standards/regulations EN 61000-4-6
- Signal ± 1 kV (Signal line, asymmetrical)
- Overvoltage category II
- ECLASS 10.0.1 27242602
- Standards/specifications RED directive 2014/53/EU EN 300328 EN 61000-6-4 EN 61000-6-2 EN 62311 EN 60950
- Connection in acc. with standard CUL
- Comments Criterion B
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 11.0 27242602
- ECLASS 5.1 27242600
- Contact discharge ± 6 kV (Test Level 3)
- Protection class III
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 5 days!
1-year warranty
$1,939.16
Stock:
21
Select Qty:
$1,939.16
$1,939.16 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
