3270318 Phoenix Contact Terminal Blocks

Product Details

• Setpoint
  1 N
• Short-time current
  0.3 kA
• Conductor cross section solid min.
  0.34 mm²
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Acceleration
  5g
• ASD level
  0.964 (m/s2)2/Hz
• Shock duration
  30 ms
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Width
  66 mm
• Conductor cross section AWG min.
  26
• Stripping length
  8 mm ... 10 mm
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.34 mm²
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Number of shocks per direction
  3
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Height
  30 mm
• Connection in acc. with standard
  IEC 60947-7-1
Static insulating material application in cold
-60 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Length
102 mm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 5.1
27141100
ECLASS 6.0
27141100
UNSPSC 21.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141100
UNSPSC 18.0
39121410
Conductor cross section AWG max.
14
Min. AWG conductor cross section, flexible
26
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 5.0
27141100
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Conductor cross section flexible min.
0.14 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
UNSPSC 19.0
39121410
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 20 14
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ETIM 6.0
EC000897
ETIM 7.0
EC000897
Number of levels
1
Color
gray
Insulating material
PA
Maximum power dissipation for nominal condition
0.56 W (the value is based on one connection block and is multiplied according to the pin assignment)
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Result of temperature-rise test
Test passed
Tight fit on carrier
NS 35
Open side panel
No
Result of tight fit on support
Test passed
Number of positions
48
Result of thermal test
Test passed
Result of aging test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Color of connection elements
gray/white
Insulating material group
I
Nominal voltage UN
500 V
Result of power-frequency withstand voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of flexion and pull-out test
Test passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
ECLASS 9.0
27141120
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Max. AWG conductor cross section, flexible
14
Internal cylindrical gage
A1
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 7.0
27141120
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Nominal cross section
1.5 mm²
Degree of pollution
3
Overvoltage category
III
Rated surge voltage
6 kV
Maximum load current
24 A (in case of a 2.5 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Result of surge voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Shock test result
Test passed
Test duration per axis
5 h
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Number of connections
288
Flammability rating according to UL 94
V0
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Nominal current IN
17.5 A
Finger protection
guaranteed
Bending test turns
135
Power frequency withstand voltage setpoint
1.89 kV
Short circuit stability result
Test passed
Conductor cross section short circuit testing
2.5 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)