2865751 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2865751
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: Programmable temperature transducer with analog output and 3 limit value relays, intrinsically safe signal input, resistance thermometer in 2-, 3-, or 4-conductor technology, thermocouples, electrical isolation, wide-range power supply, screw connection,
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Measuring & Monitoring Instruments that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2865751 Phoenix Contact price in the box on the right side or send a quick quote.
2865751 Product Details
- Behavior in the event of a sensor error according to NE 43 or freely configurable
- Typical current consumption < 100 mA (24 V DC)
- Conductor cross section solid 0.2 mm² ... 2.5 mm²
- Degree of pollution 2
- Width 35 mm
- Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
- Input signal range -1000 mV ... 1000 mV
- Potentiometer resistance range 0 Ω ... 50 kΩ
- Max. current output signal 22 mA
- Load/output load current output ≤ 600 Ω (20 mA)
- Stripping length 7 mm
- Max. voltage output signal ± 11 V
- Load/output load voltage output ≥ 10 kΩ
- Vibration A
- Humidity B
- Screw thread M3
- ECLASS 5.1 27200200
- ETIM 6.0 EC002919
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Height 112.5 mm
- Permissible humidity (operation) typ. 5 % ... 95 % (non-condensing)
- Temperature measuring range -250 °C ... 2500 °C (Range depending on the sensor type)
- Mechanical service life 1x 105 cycles
- Identification [Ex ia Ga] IIC
- ECLASS 10.0.1 27210129
- ECLASS 9.0 27210129
- UNSPSC 6.01 30211506
- UNSPSC 19.0 41112105
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Sensor types (RTD) that can be used Pt, Ni, Cu sensors: 2, 3, 4-wire
- Vibration (operation) 5g, accordance to IEC 60068-2-6
- Sensor types that can be used (TC) B, E, J, K, N, R, S, T, L, U, CA, DA, A1G, A2G, A3G, MG, LG
- Maximum inrush current 2 A (250 V AC)
- Maximum altitude ≤ 2000 m
- Shock 15g, according to IEC 60068-2-27
- Current output signal 4 mA ... 20 mA (in the case of SIL; further free configuration without SIL)
- Output name Relay output
- Housing material PA 6.6-FR
- Maximum switching voltage 250 V AC (250 V DC)
- Connection method Screw connection
- Maximum transmission error 0.1 % (e.g. for Pt 100, 300 K span, 4 ... 20 mA)
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- ECLASS 11.0 27210129
- Rated insulation voltage 300 Vrms
- Designation INMETRO
- China RoHS Environmentally Friendly Use Period = 50 years
- ETIM 2.0 EC001446
- ETIM 7.0 EC002919
- UNSPSC 20.0 41112105
- UNSPSC 7.0901 39121008
- Insulation Safe isolation in accordance with IEC/EN 61010-1
- Group IIC
- Standards/regulations EN 61000-4-6
- IECEx [Ex ia Ga] IIC
- DNV GL-EMC A
- Temperature B
- REACh SVHC Lead 7439-92-1
- ECLASS 4.0 27200200
- ECLASS 7.0 27200206
- ETIM 3.0 EC001446
- Certificate DNV 18.0143 X
- EMC A
- ECLASS 4.1 27200200
- ECLASS 5.0 27200200
- ECLASS 6.0 27200200
- ETIM 4.0 EC001446
- UNSPSC 12.01 39121008
- Additional text mixed circuit
- UL, USA/Canada UL 508 Listed
- Test voltage 2.5 kV AC (50 Hz, 1 min.)
- Max. output power Po 11 mW
- Max. external capacitance Co 21 µF
- DNV GL-Temperature B
- Electromagnetic compatibility Conformance with EMC directive
- UNSPSC 21.0 41112105
- Depth 114.5 mm
- Contact type 3 changeover contacts
- Electrical isolation 4-way, between input/output/power supply/switching output
- Conformance CE-compliant
- DNV GL-Enclosure Required protection according to the Rules shall be provided upon installation on board
- UNSPSC 18.0 41112105
- Configurable/programmable Yes
- Safety-related maximum voltage Um 253 V AC/DC
- ATEX II (1) G [Ex ia Ga] IIC
- DNV GL-Humidity B
- Ambient temperature (operation) -20 °C ... 65 °C
- Degree of protection IP20 (not assessed by UL)
- Contact material AgSnO2, hard gold-plated
- Maximum temperature coefficient 0.01 %/K
- Max. internal inductance Li negligible
- Max. external inductivity Lo 1 mH
- Supply voltage range 24 V ... 230 V AC/DC (-20 %/+10 %, 50/60 Hz)
- Overvoltage category II
- Max. output current Io 7.4 mA
- DNV GL-Vibration A
- Conductor cross section flexible 0.2 mm² ... 2.5 mm²
- Step response (0–99%) typ. 1000 ms (With SIL)
- Max. output voltage Uo 6 V
- Torque 0.5 Nm ... 0.6 Nm
- Status display Green LED (supply voltage, PWR)
- Color gray
- Max. internal capacitance Ci 44 nF
- Noise emission EN 61000-6-4
- Power consumption < 2.4 W
- Conductor cross section AWG 24 ... 14
- Interference emission EN 61000-6-4
- Typical deviation from the measuring range final value 2 %
- UNSPSC 11 39121008
- UNSPSC 13.2 41112105
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
2865751
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
