Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

Live support:

Monday - Friday 6AM - 6PM PST

2865515 Phoenix Contact Electrical Measuring & Monitoring Instruments

Phoenix Contact 2865515 Ex i solenoid driver. For the intrinsically safe control of Ex i solenoid valves, alarm modules or LEDs installed in the Ex area. Current limitation at 58 mA. For gases up to Group IIB, loop-powered, electrical isolation, SIL 3. Screw connection.
Phoenix Contact

Part#:2865515

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: Ex i solenoid driver. For the intrinsically safe control of Ex i solenoid valves, alarm modules or LEDs installed in the Ex area. Current limitation at 58 mA. For gases up to Group IIB, loop-powered, electrical isolation, SIL 3. Screw connection.

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 2865515 Phoenix Contact price in the box on the right side or send a quick quote.

2865515 Product Details

  • Height
    112.5 mm
  • Response time
    20 ms
  • Connection method
    Screw connection
  • Torque
    0.5 Nm ... 0.6 Nm
  • Ambient temperature (storage/transport)
    -40 °C ... 80 °C
  • Output characteristic curve: Output resistor
    133.4 Ω (Internal resistance Ri)
  • Stripping length
    7 mm
  • Conductor cross section AWG
    24 ... 14
  • Status display
    Yellow LED (switching state / status, lights up when output circuit is active)
  • Housing material
    PA 6.6-FR
  • Color
    gray
  • λSU
    2.84 x 10-7 (284 FIT)
  • Maximum altitude
    ≤ 2000 m
  • Noise immunity
    EN 61000-6-2
  • Note
    This is an extract of possible combinations of valves and solenoid drivers.
  • Conductor cross section flexible
    0.2 mm² ... 2.5 mm²
  • No. of channels
    1
  • Designation
    EAC Ex
  • Integrity requirement
    IEC 61508 - Low demand
  • Safety Integrity Level (SIL)
    3
  • Probability of a hazardous failure on demand (PFDAVG)
    0 (1 year)
  • Group
    IIB/IIIC
  • Max. external capacitance Co
    790 nF
  • Width
    12.5 mm
  • Utilization restriction
    EMC: class A product, see manufacturer's declaration in the download area
  • Permissible humidity (operation)
    10 % ... 95 % (non-condensing)
  • Power dissipation
    < 1.325 W
  • Screw thread
    M3
  • Maximum temperature coefficient
    0.01 %/K
  • Interference emission
    EN 61000-6-4
  • Rated insulation voltage
    300 Vrms
  • Equipment type
    Type A
  • λDD
    0
  • Max. internal capacitance Ci
    negligible
  • Max. output current Io
    188 mA
  • Noise emission
    EN 61000-6-4
  • DNV GL-EMC
    A
  • Vibration
    A
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • Depth
    114.5 mm
  • Ambient temperature (operation)
    -40 °C ... 60 °C (any mounting position, pay attention to the derating curve in the data sheet)
  • Degree of protection
    IP20 (not assessed by UL)
  • Compatible valve
    ASCO Coil 302 (12 V)
  • Conductor cross section solid
    0.2 mm² ... 2.5 mm²
  • Degree of pollution
    2
  • Overvoltage category
    II
  • Insulation
    Safe isolation in accordance with IEC/EN 61010-1
  • Safe Failure Fraction (SFF)
    100 %
  • Max. internal inductance Li
    negligible
  • Max. output voltage Uo
    25.1 V
  • Max. external inductivity Lo
    0.1 mH
  • Standards/regulations
    GB 3626.20
  • DNV GL-Temperature
    B
  • Temperature
    B
  • Enclosure
    Required protection according to the Rules shall be provided upon installation on board
  • ECLASS 4.1
    27210100
  • ETIM 4.0
    EC002653
  • ETIM 6.0
    EC002653
  • UNSPSC 19.0
    39121008
  • Electromagnetic compatibility
    Conformance with EMC directive
  • Electrical isolation
    375 V (Peak value in accordance with IEC/EN 60079-11)
  • Test voltage
    2.5 kV AC (50 Hz, 1 min.)
  • λSD
    0
  • Diagnostic coverage (DC)
    DCS=0 %, DCD=0 %
  • Max. output power Po
    1.18 W
  • Safety-related maximum voltage Um
    253 V AC (125 V DC)
  • ATEX
     II (1) G [Ex ia Ga] IIB/IIA
  • DNV GL-Vibration
    A
  • Humidity
    B
  • ECLASS 11.0
    27210120
  • ECLASS 4.0
    27210100
  • ECLASS 9.0
    27210120
  • UNSPSC 7.0901
    39121008
  • UNSPSC 18.0
    39121008
  • λDU
    0
  • Input power Pi
    negligible
  • Additional text
    and EN 61326
  • Conformance
    CE-compliant, additionally EN 61326
  • IECEx
    [Ex ia Ga] IIB/IIA
  • DNV GL-Humidity
    B
  • DNV GL-Enclosure
    Required protection according to the Rules shall be provided upon installation on board
  • Identification
     [Ex ia Ga] IIC
  • REACh SVHC
    Lead 7439-92-1
  • ECLASS 5.0
    27210100
  • ECLASS 7.0
    27210120
  • UNSPSC 11
    39121008
  • UNSPSC 21.0
    39121008
  • UL, USA/Canada
    Class I Div 2; IS for Class I, II, III Div 1
  • Certificate
    RU C-DE.AB72.B.00093/19
  • EMC
    A
  • ECLASS 10.0.1
    27210120
  • ECLASS 5.1
    27210100
  • UNSPSC 6.01
    30211506
  • UNSPSC 20.0
    39121008
  • ECLASS 6.0
    27210100
  • ETIM 7.0
    EC002653
  • UNSPSC 13.2
    39121008
  • UNSPSC 12.01
    39121008

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo