2865366 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2865366
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 3
Nov 22, 2024
Ex i measuring transducer power supply and input signal conditioner, HART-transparent. Transfers supplied or active 0/4…20 mA electrically isolated signals from the Ex area to two loads in the safe area. 4-way electrical isolation, screw connection, SIL,
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Measuring & Monitoring Instruments that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2865366 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
- Conductor cross section AWG 24 ... 14
- Torque 0.5 Nm ... 0.6 Nm
- Maximum transmission error < 0.1 % (of final value)
- Electromagnetic compatibility Conformance with EMC directive
- Color gray
- Overvoltage category II
- Max. output current Io 93 mA
- Group IIC
- Standards/regulations GB 3626.20
- Max. external inductivity Lo 10 µH
- Input voltage Ui ≤ 30 V
- DNV GL-Humidity B
- Vibration A
- UNSPSC 13.2 39121008
- Underload/overload signal range 0 mA ... 24 mA (Extended transmission range for diagnostics)
- Output ripple < 20 mVrms
- Screw thread M3
- Electrical isolation 375 V (Peak value in accordance with IEC/EN 60079-11)
- Signal input Signal conditioner operation
- Voltage drop < 3.9 V (in input isolating amplifier operation)
- Conductor cross section flexible 0.2 mm² ... 2.5 mm²
- No. of channels 1
- Status display Green LED (PWR supply voltage)
- Housing material PA 6.6-FR
- Insulation Safe isolation in accordance with IEC/EN 61010-1
- UNSPSC 20.0 39121008
- Degree of pollution 2
- Max. external capacitance Co 1 µF
- Noise emission EN 61000-6-4
- DNV GL-Temperature B
- UNSPSC 11 39121008
- UNSPSC 21.0 39121008
- Load/output load current output < 450 Ω (20 mA)
- Connection method Screw connection
- Conductor cross section solid 0.2 mm² ... 2.5 mm²
- Connection name Test socket
- Transmission error, typical < 0.05 % (of final value)
- UNSPSC 18.0 39121008
- Degree of protection IP20 (not assessed by UL)
- Power dissipation < 1.2 W (24 V DC / 20 mA)
- Stripping length 7 mm
- Max. diameter 2.3 mm
- UNSPSC 12.01 39121008
- UNSPSC 19.0 39121008
- Nominal supply voltage 24 V DC
- HART function Yes
- Input current Ii ≤ 150 mA
- REACh SVHC Lead 7439-92-1
- Max. current consumption < 46 mA (24 V DC / 20 mA)
- DNV GL-Enclosure Required protection according to the Rules shall be provided upon installation on board
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (storage/transport) -40 °C ... 80 °C
- Current output signal 0 mA ... 20 mA (active)
- Depth 114.5 mm
- Height 112.5 mm
- Permissible humidity (operation) 10 % ... 95 % (non-condensing)
- Supply voltage range 19.2 V DC ... 30 V DC (24 V DC -20%...+25%)
- Nominal supply voltage range 19.2 V DC ... 30 V DC (24 V DC -20%...+25%)
- Width 12.5 mm
- Transmitter supply voltage > 16 V (20 mA)
- Current input signal 0 mA ... 20 mA
- Maximum temperature coefficient < 0.01 %/K
- Max. output power Po 587 mW
- Maximum altitude ≤ 2000 m
- Signal output Signal conditioner operation
- Output behavior in the event of an error 0 mA (Cable break in the input)
- Step response (10-90%) 1.3 ms (for jump 4 mA ... 20 mA, typical)
- Protocols supported HART
- Safety-related maximum voltage Um 253 V AC (125 V DC)
- IECEx [Ex ia Ga] IIC
- Humidity B
- EMC A
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- ECLASS 5.0 27210100
- Ambient temperature (operation) -20 °C ... 60 °C (Any mounting position)
- Polarization and surge protection Yes
- Test voltage 1.5 kV AC (50 Hz, 1 min.)
- Max. output voltage Uo 25.2 V
- Additional text and EN 61326
- Max. internal inductance Li negligible
- DNV GL-Vibration A
- Identification [Ex ia Ga] IIC
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 11.0 27210120
- ECLASS 4.0 27210100
- ECLASS 7.0 27210120
- UNSPSC 6.01 30211506
- UNSPSC 7.0901 39121008
- ETIM 7.0 EC002653
- Interference emission EN 61000-6-4
- Max. internal capacitance Ci negligible
- UL, USA/Canada Class I Div 2; IS for Class I, II, III Div 1
- DNV GL-EMC A
- Temperature B
- Certificate DNV 18.0139 X
- ECLASS 10.0.1 27210120
- ECLASS 6.0 27210100
- ETIM 6.0 EC002653
- ECLASS 9.0 27210120
- Designation INMETRO
- Rated insulation voltage 300 Vrms
- Operation Signal conditioner operation
- ATEX II (1) G [Ex ia Ga] IIC
- Conformance CE-compliant, additionally EN 61326
- ECLASS 5.1 27210100
- ETIM 4.0 EC002653
- ECLASS 4.1 27210100
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$620.72
Stock:
3
Select Qty:
$620.72
$620.72 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
