2811970 Phoenix Contact Electrical Measuring & Monitoring Instruments

2811970 Product Details

• Height
  116 mm
• Maximum altitude
  ≤ 2000 m
• Sensor types that can be used (TC)
  B, E, J, K, N, R, S, T, L, U, CA, DA, A1G, A2G, A3G, MG, LG
• Load/output load voltage output
  ≥ 10 kΩ
• ETIM 6.0
  EC002919
• ETIM 7.0
  EC002919
• UNSPSC 21.0
  41112105
• UNSPSC 18.0
  41112105
• UNSPSC 6.01
  30211506
• ETIM 3.0
  EC001446
• UNSPSC 11
  39121008
• UNSPSC 20.0
  41112105
• ECLASS 9.0
  27210129
• ETIM 4.0
  EC001446
• UNSPSC 13.2
  41112105
• UNSPSC 19.0
  41112105
• ETIM 2.0
  EC001446
• UNSPSC 12.01
  39121008
• UNSPSC 7.0901
  39121008
• Depth
  114.5 mm
Permissible humidity (operation)
typ. 5 % ... 95 % (non-condensing)
Configurable/programmable
Yes
Output name
Relay output
Supply voltage range
24 V ... 230 V AC/DC (-20 %/+10 %, 50/60 Hz)
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Overvoltage category
II
Rated insulation voltage
300 Vrms
Electrical isolation
4-way, between input/output/power supply/switching output
ATEX
 II 3 G Ex nA nC ic IIC T4 Gc X
DNV GL-Vibration
A
DNV GL-EMC
A
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27200200
ECLASS 5.0
27200200
Max. current output signal
22 mA
Contact material
AgSnO2, hard gold-plated
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Degree of pollution
2
Color
gray
Conformance
CE-compliant
DNV GL-Humidity
B
Identification
2
Vibration
A
ECLASS 11.0
27210129
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Temperature measuring range
-250 °C ... 2500 °C (Range depending on the sensor type)
Current output signal
4 mA ... 20 mA (in the case of SIL; further free configuration without SIL)
Behavior in the event of a sensor error
according to NE 43 or freely configurable
Contact type
1 changeover contact
Power consumption
< 1.5 W
Electromagnetic compatibility
Conformance with EMC directive
Designation
Safety Integrity Level (SIL, IEC 61508)
Noise emission
EN 61000-6-4
Certificate
DNV GL TAA000020C
Temperature
B
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 10.0.1
27210129
ECLASS 5.1
27200200
Sensor types (RTD) that can be used
Pt, Ni, Cu sensors: 2, 3, 4-wire
Potentiometer resistance range
0 Ω ... 50 kΩ
Maximum switching voltage
30 V AC (30 V DC)
Stripping length
8 mm
Maximum temperature coefficient
0.01 %/K
Housing material
PA 6.6-FR
Insulation
Safe isolation in accordance with IEC/EN 61010-1
UL, USA/Canada
UL 508 Listed
IECEx
Ex nA nC ic IIC T4 Gc X
Humidity
B
REACh SVHC
Lead 7439-92-1
ECLASS 7.0
27200206
Width
17.5 mm
Ambient temperature (operation)
-20 °C ... 65 °C
Input signal range
-1000 mV ... 1000 mV
Maximum inrush current
0.5 A (30 V AC)
Connection method
Push-in connection
Conductor cross section AWG
24 ... 16
Interference emission
EN 61000-6-4
Test voltage
2.5 kV AC (50 Hz, 1 min.)
DNV GL-Temperature
B
DNV GL-Enclosure
Required protection according to the Rules shall be provided upon installation on board
EMC
A
ECLASS 4.1
27200200
ECLASS 6.0
27200200
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Load/output load current output
≤ 600 Ω (at 20 mA)

Product condition