2811828 Phoenix Contact Electrical Measuring & Monitoring Instruments

2811828 Product Details

• Load/output load voltage output
  ≥ 10 kΩ
• Contact material
  AgSnO2, hard gold-plated
• Power consumption
  < 2.4 W
• Behavior in the event of a sensor error
  according to NE 43 or freely configurable
• Supply voltage range
  24 V ... 230 V AC/DC (-20 %/+10 %, 50/60 Hz)
• Conductor cross section flexible
  0.2 mm² ... 1.5 mm²
• Color
  gray
• Maximum temperature coefficient
  0.01 %/K
• Electromagnetic compatibility
  Conformance with EMC directive
• Electrical isolation
  4-way, between input/output/power supply/switching output
• Noise emission
  EN 61000-6-4
• DNV GL-Temperature
  B
• Vibration
  A
• Current output signal
  4 mA ... 20 mA (in the case of SIL; further free configuration without SIL)
• Load/output load current output
  ≤ 600 Ω (at 20 mA)
• Housing material
  PA 6.6-FR
• Designation
  Safety Integrity Level (SIL, IEC 61508)
• IECEx
  Ex nA nC ic IIC T4 Gc X
• DNV GL-Humidity
  B
• Contact type
  3 changeover contacts
Maximum inrush current
2 A (250 V AC)
Degree of pollution
2
Interference emission
EN 61000-6-4
Overvoltage category
II
Insulation
Safe isolation in accordance with IEC/EN 61010-1
UL, USA/Canada
UL 508 Listed
DNV GL-Vibration
A
Certificate
DNV GL TAA000020C
REACh SVHC
Lead 7439-92-1
Depth
114.5 mm
Ambient temperature (operation)
-20 °C ... 65 °C
Temperature measuring range
-250 °C ... 2500 °C (Range depending on the sensor type)
Maximum switching voltage
250 V AC (250 V DC)
Maximum transmission error
0.1 % (e.g. for Pt 100, 300 K span, 4 ... 20 mA)
Max. voltage output signal
± 11 V
ECLASS 9.0
27210129
Height
116 mm
Output name
Relay output
ETIM 7.0
EC002919
Stripping length
8 mm
Conductor cross section AWG
24 ... 16
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Permissible humidity (operation)
typ. 5 % ... 95 % (non-condensing)
Input signal range
-1000 mV ... 1000 mV
Connection method
Push-in connection
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Sensor types that can be used (TC)
B, E, J, K, N, R, S, T, L, U, CA, DA, A1G, A2G, A3G, MG, LG
Configurable/programmable
Yes
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Width
35 mm
Maximum altitude
≤ 2000 m
Sensor types (RTD) that can be used
Pt, Ni, Cu sensors: 2, 3, 4-wire
Potentiometer resistance range
0 Ω ... 50 kΩ
Max. current output signal
22 mA
ECLASS 6.0
27200200
ECLASS 5.0
27200200
ETIM 6.0
EC002919
UNSPSC 7.0901
39121008
UNSPSC 19.0
41112105
ECLASS 10.0.1
27210129
ECLASS 4.1
27200200
ETIM 2.0
EC001446
UNSPSC 13.2
41112105
EMC
A
ECLASS 4.0
27200200
ECLASS 7.0
27200206
ETIM 4.0
EC001446
UNSPSC 12.01
39121008
UNSPSC 18.0
41112105
Test voltage
2.5 kV AC (50 Hz, 1 min.)
Identification
2
DNV GL-EMC
A
Humidity
B
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 5.1
27200200
UNSPSC 6.01
30211506
UNSPSC 21.0
41112105
Rated insulation voltage
300 Vrms
Conformance
CE-compliant
ATEX
 II 3 G Ex nA nC ic IIC T4 Gc X
Temperature
B
ECLASS 11.0
27210129
ETIM 3.0
EC001446
UNSPSC 11
39121008
UNSPSC 20.0
41112105
China RoHS
Environmentally Friendly Use Period = 50 years
DNV GL-Enclosure
Required protection according to the Rules shall be provided upon installation on board

Product condition