2811556 Phoenix Contact Electrical Measuring & Monitoring Instruments

2811556 Product Details

• Degree of protection
  IP20 (not assessed by UL)
• Max. input current
  ± 100 mA
• Input resistance current input
  approx. 10 Ω (± 10 mA DC ... ± 100 mA DC)
• Voltage output signal
  0 V ... 10 V (Configurable via DIP switches)
• Supply voltage range
  12 V DC ... 24 V DC (-20 % / +25 %)
• Conductor cross section flexible
  0.2 mm² ... 1.5 mm²
• Alignment zero
  ± 4 %
• Rated insulation voltage
  300 V AC
• Color
  gray
• UNSPSC 18.0
  39121008
• Depth
  114.5 mm
• Voltage input signal
  0 mV ... 50 mV
• Number of inputs
  1
• Input resistance of voltage input
  approx. 1 MΩ (±1 V DC ...  ±100 V DC)
• Current output signal
  0 mA ... 5 mA
• Load/output load current output
  ≤ 600 Ω (20 mA; active)
• Power consumption
  ≤ 700 mW
• UNSPSC 7.0901
  39121008
• UNSPSC 19.0
  39121008
• Connection method
  Push-in connection
Maximum temperature coefficient
0.0075 %/K
Test voltage, input/output/supply
2.5 kV (50 Hz, 1 min.)
Housing material
PA 6.6-FR
UNSPSC 21.0
39121008
Width
12.5 mm
Ambient temperature (operation)
-20 °C ... 70 °C
Height
116 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Min. input voltage
± 50 mV
EMC
A
UNSPSC 13.2
39121008
UNSPSC 20.0
39121008
Temperature
B
ECLASS 4.0
27210100
ECLASS 7.0
27210120
ETIM 7.0
EC002653
UNSPSC 12.01
39121008
Stripping length
8 mm
Limit frequency (3 dB)
10 kHz (Can be switched to 30 Hz)
Step response (10-90%)
35 µs (at 10 kHz)
ATEX
 II 3 G Ex nA IIC T4 Gc
max. input voltage
± 100 V
Number of outputs
1
No. of channels
1
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Configurable/programmable
Yes, can be switched
Conductor cross section AWG
24 ... 16
Alignment span
± 4 %
Standards/regulations
GB 3836.1
DNV GL-Humidity
B
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27210100
ETIM 6.0
EC002653
Maximum altitude
≤ 2000 m
Current input signal
0 mA ... 1 mA (Configurable via DIP switches)
Ripple
< 10 mVrms
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Maximum transmission error
≤ 0.1 % (Compared to the final value)
Mounting position
any
IECEx
Ex nA IIC T4 Gc
Certificate
DNV GL TAA000020C
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 11.0
27210120
ECLASS 5.0
27210100
ECLASS 9.0
27210120
Load/output load voltage output
≥ 1 kΩ (10 V)
Protective circuit
Transient protection
Electromagnetic compatibility
Conformance with EMC directive
Conformance
CE-compliant
DNV GL-EMC
A
Identification
2
ECLASS 4.1
27210100
UNSPSC 11
39121008
Overvoltage category
II
Degree of pollution
2
Designation
Safety Integrity Level (SIL, IEC 61508)
UL, USA/Canada
UL 61010 Listed
DNV GL-Enclosure
Required protection according to the Rules shall be provided upon installation on board
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27210100
DNV GL-Temperature
B
DNV GL-Vibration
A
Vibration
A
Humidity
B
ECLASS 10.0.1
27210120
ETIM 4.0
EC002653
UNSPSC 6.01
30211506

Product condition