2780014 Phoenix Contact Terminal Blocks
Part#:2780014
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: Feed-through terminal block, connection method: Screw connection, cross section: 0.2 mm² - 4 mm², AWG: 24 - 12, width: 6.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15, NS 32
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2780014 Phoenix Contact price in the box on the right side or send a quick quote.
2780014 Product Details
- Number of levels 2
- Degree of pollution 3
- Connection in acc. with standard CUL
- Result of surge voltage test Test passed
- Tensile test result Test passed
- Result of tight fit on support Test passed
- ECLASS 5.0 27141100
- ETIM 3.0 EC000897
- Nominal cross section 4 mm²
- Relative insulation material temperature index (Elec.; UL 746 B) 130 °C
- Connection method Screw connection
- Color gray
- Insulating material group I
- Nominal voltage UN 800 V
- Result of power-frequency withstand voltage test Test passed
- Bending test rotation speed 10 rpm
- Bending test conductor cross section/weight 0.2 mm² / 0.2 kg
- Tight fit on carrier NS 32/NS 35
- Result of temperature-rise test Test passed
- Result of thermal test Test passed
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 4.0 27141100
- ECLASS 6.0 27141100
- Rated surge voltage 8 kV
- Result of flexion and pull-out test Test passed
- Conductor cross section tensile test 4 mm²
- Number of connections 4
- Flammability rating according to UL 94 V2
- Overvoltage category III
- Finger protection guaranteed
- Requirements, voltage drop ≤ 3.2 mV
- Requirement, voltage drop 2nd level ≤ 3.2 mV
- Conductor cross section short circuit testing 4 mm²
- Width 6.2 mm
- 2 conductors with same cross section, solid max. 2.5 mm²
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum 2.5 mm²
- Height NS 32 69 mm
- Conductor cross section AWG min. 24
- Conductor cross section AWG max. 12
- Stripping length 8 mm
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- ECLASS 4.1 27141100
- Conductor cross section solid max. 4 mm²
- Permissible humidity (storage/transport) 30 % ... 70 %
- ETIM 4.0 EC000897
- Screw thread M3
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 10.0.1 27141120
- ETIM 6.0 EC000897
- Tightening torque max 0.8 Nm
- Open side panel No
- Power frequency withstand voltage setpoint 2 kV
- Tractive force setpoint 60 N
- Length 84.5 mm
- Height NS 35/15 72.5 mm
- Maximum power dissipation for nominal condition 1.02 W (the value is multiplied when connecting multiple levels)
- Short-time current 0.48 kA
- ECLASS 7.0 27141120
- Nominal current IN 32 A
- 2 conductors with same cross section, stranded min. 0.2 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 1.5 mm²
- Shock protection test specification IEC 60529:2001-02
- Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm²
- Bending test turns 135
- Setpoint 1 N
- 2 conductors with same cross section, solid min. 0.2 mm²
- Short circuit stability result Test passed
- Height NS 35/7,5 64 mm
- Result of voltage-drop test Test passed
- Conductor cross section flexible min. 0.2 mm²
- Conductor cross section flexible max. 4 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm²
- Checking the mechanical stability of terminal points (5 x conductor connection) Test passed
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Static insulating material application in cold -60 °C
- Conductor cross section solid min. 0.2 mm²
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Cross section with insertion bridge, solid max. 4 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm²
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum 0.25 mm²
- 2 conductors with same cross section, stranded max. 2.5 mm²
- Insulating material PA
- Tightening torque, min 0.6 Nm
- UNSPSC 7.0901 39121410
- UNSPSC 12.01 39121410
- UNSPSC 11 39121410
- UNSPSC 21.0 39121410
- Maximum load current 32 A (with 4 mm² conductor cross section)
- Back of the hand protection guaranteed
- Surge voltage test setpoint 9.8 kV
- UNSPSC 6.01 30211811
- UNSPSC 13.2 39121410
- ECLASS 5.1 27141100
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm²
- Cross section with insertion bridge, stranded max. 2.5 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 125°C)
- ECLASS 11.0 27141120
- ETIM 2.0 EC000897
- UNSPSC 18.0 39121410
- UNSPSC 19.0 39121410
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ECLASS 9.0 27141120
- ETIM 7.0 EC000897
- UNSPSC 20.0 39121410
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
2780014
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨