2775485 Phoenix Contact Terminal Blocks

2775485 Product Details

• ECLASS 10.0.1
  27141120
• Internal cylindrical gage
  A3
• Color
  gray
• Overvoltage category
  III
• Insulating material group
  I
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of surge voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Setpoint
  5 N
• Conductor cross section short circuit testing
  2.5 mm²
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Height NS 35/7,5
  73 mm
• Height NS 35/15
  80.5 mm
• Conductor cross section flexible min.
  0.2 mm²
• 2 conductors with same cross section, solid min.
  0.2 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
  1 mm²
• Number of connections
  6
• Rated surge voltage
  6 kV
• Connection in acc. with standard
  CSA
• Maximum load current (upper level)
  32 A
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Tractive force setpoint
100 N
Tight fit on carrier
NS 32/NS 35
Short circuit stability result
Test passed
Short-time current
0.3 kA
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 32
78 mm
Length
77.5 mm
Conductor cross section solid max.
4 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
ECLASS 5.1
27141100
Permissible humidity (storage/transport)
30 % ... 70 %
Insulating material
PA
Maximum power dissipation for nominal condition
1.82 W (the value is multiplied when connecting multiple levels)
Nominal voltage UN
500 V
Surge voltage test setpoint
7.3 kV
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
10.2 mm
Connection method
Screw connection
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Stripping length
8 mm
Tightening torque max
0.8 Nm
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27141100
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Number of levels
2
Flammability rating according to UL 94
V0
Nominal current IN
57 A
Maximum load current
70 A (with 16 mm² conductor cross section)
Back of the hand protection
guaranteed
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Result of voltage-drop test
Test passed
Requirement, voltage drop 2nd level
≤ 3.2 mV
Proof of thermal characteristics (needle flame) effective duration
30 s
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section AWG min.
24
2 conductors with same cross section, stranded max.
1.5 mm²
Tightening torque, min
0.5 Nm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27141100
ETIM 2.0
EC000897
ETIM 7.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Nominal cross section
10 mm²
Degree of pollution
3
Nominal current IN (upper level)
24 A
Open side panel
Yes
Power frequency withstand voltage setpoint
1.89 kV
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Conductor cross section tensile test
16 mm²
Requirements, voltage drop
≤ 3.2 mV
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Note
upper level
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Screw thread
M3
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
ETIM 4.0
EC000897
UNSPSC 13.2
39121410

Product condition