2775375 Phoenix Contact Terminal Blocks

Product Details

• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test duration per axis
  5 h
• Potentials
  1
• Insulating material
  PA
• Maximum power dissipation for nominal condition
  0.77 W (the value is multiplied when connecting multiple levels)
• Nominal current IN
  24 A (with 4 mm² conductor cross section)
• Open side panel
  Yes
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Width
  5.2 mm
• Stripping length
  8 mm
• Conductor cross section AWG max.
  12
• Max. AWG conductor cross section, flexible
  14
• 2 conductors with same cross section, solid min.
  0.2 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
  0.25 mm²
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 5.1
  27141100
• ETIM 2.0
  EC000897
• ETIM 7.0
  EC000897
UNSPSC 19.0
39121410
Number of levels
2
Nominal cross section
2.5 mm²
Rated surge voltage
6 kV
Degree of pollution
3
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Conductor cross section tensile test
4 mm²
Tractive force setpoint
60 N
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Conductor cross section short circuit testing
2.5 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
47 mm
Screw thread
M3
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
24
Min. AWG conductor cross section, flexible
24
Cross section with insertion bridge, solid max.
2.5 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Number of connections
4
Color
gray
Flammability rating according to UL 94
V2
Overvoltage category
III
Maximum load current
32 A (in case of a 4 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Nominal voltage UN
500 V
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Tight fit on carrier
NS 32/NS 35
Setpoint
1 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
End cover width
1.5 mm
Connection
1 level
Tightening torque, min
0.5 Nm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A3
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of tight fit on support
Test passed
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Result of temperature-rise test
Test passed
Short-time current
0.3 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Acceleration
30g
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
63.5 mm
Connection method
Screw connection
Connection in acc. with standard
CSA
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Cross section with insertion bridge, stranded max.
2.5 mm²
2 conductors with same cross section, solid max.
1 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 10.0.1
27141120
ECLASS 4.1
27141100
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/15
54.5 mm
Height NS 32
52 mm
Tightening torque max
0.6 Nm
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 5.0
27141100
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410