2715092 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  6
• Insulating material
  PA
• Degree of pollution
  3
• Insulating material group
  I
• Connection in acc. with standard
  CSA
• Open side panel
  No
• Back of the hand protection
  guaranteed
• Result of power-frequency withstand voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Result of tight fit on support
  Test passed
• Result of thermal test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Acceleration
  30g
• Shock form
  Half-sine
• Number of shocks per direction
  3
• Width
  6.2 mm
• Height NS 35/7,5
  54.5 mm
• Conductor cross section solid min.
  0.2 mm²
• Conductor cross section AWG max.
  12
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.25 mm²
Cross section with insertion bridge, solid max.
4 mm²
Cross section with insertion bridge, stranded max.
2.5 mm²
2 conductors with same cross section, stranded max.
1 mm²
Number of levels
3
Color
gray
Rated surge voltage
4 kV
Overvoltage category
III
Maximum load current
32 A (in case of a 4 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Bending test turns
135
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
ASD level
6.12 (m/s2)2/Hz
Test duration per axis
5 h
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Height NS 35/15
62 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
ETIM 6.0
EC000900
UNSPSC 13.2
39121410
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27141100
ECLASS 4.1
27141100
ECLASS 7.0
27141128
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410
Nominal cross section
2.5 mm²
Flammability rating according to UL 94
V2
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Nominal current IN
24 A
Nominal voltage UN
250 V
Finger protection
guaranteed
Power frequency withstand voltage setpoint
1.5 kV
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Setpoint
1 N
Result of temperature-rise test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec.; UL 746 B)
125 °C
Static insulating material application in cold
-40 °C
Length
72.5 mm
Connection method
Screw connection
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid max.
1 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A3
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 9.0
27141128
ETIM 4.0
EC000900
UNSPSC 11
39121410
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1 mm²
Stripping length
8 mm
Screw thread
M3
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141128
ECLASS 5.1
27141100
ETIM 3.0
EC000900
ETIM 7.0
EC000900
UNSPSC 18.0
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Tightening torque, min
0.5 Nm
Tightening torque max
0.6 Nm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141128
ECLASS 6.0
27141100
ETIM 2.0
EC000900
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410