2715966 Phoenix Contact Terminal Blocks

2715966 Product Details

• ETIM 2.0
  EC000900
• Nominal cross section
  2.5 mm²
• Overvoltage category
  III
• Nominal voltage UN
  250 V
• Surge voltage test setpoint
  4.8 kV
• Bending test turns
  135
• Tractive force setpoint
  60 N
• Tight fit on carrier
  NS 35
• Result of thermal test
  Test passed
• Length
  55 mm
• Conductor cross section solid min.
  0.2 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.25 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.25 mm²
• 2 conductors with same cross section, solid max.
  1 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
  0.25 mm²
• Stripping length
  8 mm
• Tightening torque max
  0.6 Nm
• ECLASS 11.0
  27141128
• Number of levels
  3
• Flammability rating according to UL 94
  V2
Connection in acc. with standard
CSA
Nominal current IN
24 A
Shock protection test specification
IEC 60529:2001-02
Result of power-frequency withstand voltage test
Test passed
Result of tight fit on support
Test passed
Setpoint
1 N
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
4 mm²
Width
6.2 mm
Conductor cross section flexible min.
0.2 mm²
Cross section with insertion bridge, solid max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1 mm²
Screw thread
M3
Tightening torque, min
0.5 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 3.0
EC000900
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
Color
gray
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Back of the hand protection
guaranteed
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Requirements, voltage drop
≤ 3.2 mV
Static insulating material application in cold
-40 °C
Connection method
Screw connection
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141128
ECLASS 6.0
27141100
ECLASS 9.0
27141128
ETIM 6.0
EC000900
Insulating material
PA
Degree of pollution
3
Open side panel
No
Power frequency withstand voltage setpoint
1.5 kV
Bending test rotation speed
10 rpm
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Relative insulation material temperature index (Elec.; UL 746 B)
125 °C
Height NS 35/7,5
54.5 mm
Height NS 35/15
62 mm
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Cross section with insertion bridge, stranded max.
2.5 mm²
Internal cylindrical gage
A3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27141100
ECLASS 4.1
27141100
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Number of connections
3
Rated surge voltage
4 kV
Insulating material group
I
Maximum load current
26 A (with 4 mm² conductor cross section)
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Conductor cross section tensile test
4 mm²
Short-time current
0.48 kA
Proof of thermal characteristics (needle flame) effective duration
30 s
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Conductor cross section solid max.
4 mm²
Conductor cross section AWG max.
12
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, stranded max.
1 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ECLASS 7.0
27141128
ETIM 4.0
EC000900
UNSPSC 18.0
39121410
ETIM 7.0
EC000900
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410

Product condition