2708384 Phoenix Contact Data & Networking Devices
Part#:2708384
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: FO converter with integrated optical diagnostics, alarm contact, for RS-422/RS-485 4-wire/INTERBUS up to 2 Mbps, T-coupler with two FO interfaces (FSMA), 660 nm, for polymer/PCF fiber cable
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Data & Networking Devices that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2708384 Phoenix Contact price in the box on the right side or send a quick quote.
2708384 Product Details
- UNSPSC 18.0 43223323
- Noise emission EN 55011
- Housing material PA 6.6-FR
- Typical current consumption 100 mA (24 V DC)
- Operating mode full duplex
- Transmit capacity, minimum -4.6 dBm (980/1000 µm)
- UNSPSC 21.0 43223323
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Permissible humidity (operation) 30 % ... 95 % (non-condensing)
- Output description Alarm output
- Noise immunity EN 61000-6-2:2005
- Certificate PTB 06 ATEX 2042 U
- UNSPSC 7.0901 39121008
- Connection method F-SMA
- Transmission length ≤ 1000 m (depending on the data rate, with shielded, twisted data cable)
- Conductor cross section AWG max. 14
- Output name Relay output
- Width 35 mm
- Designation Corrosive gas test
- Degree of protection IP20
- Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
- UNSPSC 13.2 43222604
- MTBF 284 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
- Mounting type DIN rail mounting
- Nominal supply voltage 24 V DC (in acc. with UL)
- Transmission length incl. 3 dB system reserve 100 m (With F-P 980/1000 230 dB/km with quick mounting connector)
- Max. current consumption 130 mA
- Conductor cross section solid min. 0.2 mm²
- Limiting continuous current 0.46 A
- Type of test Shock in acc. with EN 60068-2-27/IEC 60068-2-27
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Transmission channels 2 (1/1) RD, TD, full duplex
- Serial transmission speed ≤ 2 Mbps
- Bit distortion, output < 6.25 %
- Wavelength 660 nm
- MTTF 861 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
- Transmission medium Polymer fiber
- Conductor cross section flexible min. 0.2 mm²
- Conductor cross section AWG min. 24
- Height 99 mm
- Ambient temperature (operation) -20 °C ... 60 °C
- Altitude ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
- Test voltage data interface/power supply 1.5 kVrms (50 Hz, 1 min.)
- Color green
- Minimum receiver sensitivity -31.2 dBm
- Number of outputs 1
- Identification ISA-S71.04-1985 G3 Harsh Group A
- Bit distortion, input ± 35 % (permitted)
- Maximum switching voltage 60 V DC
- Electrical isolation VCC // RS-422
- UNSPSC 20.0 43223323
- Net weight 197.98 g
- Additional text Please follow the special installation instructions in the documentation!
- Comments Criterion B
- Supply voltage range 18 V DC ... 30 V DC
- Interface 1 RS-422 interface in acc. with ITU-T V.11, EIA/TIA-422, DIN 66348-1
- ECLASS 10.0.1 19170132
- ECLASS 6.0 19179200
- Termination resistor 220 Ω
- Conductor cross section flexible max. 2.5 mm²
- Transmission protocol Transparent to protocol for RS-422 interface
- Depth 103 mm
- ETIM 7.0 EC001467
- Conductor cross section solid max. 2.5 mm²
- ECLASS 9.0 19170114
- UNSPSC 6.01 30211506
- ETIM 4.0 EC001423
- UNSPSC 19.0 43223323
- UNSPSC 12.01 39121008
- Standards/regulations EN 55011
- ECLASS 5.1 27230200
- ETIM 2.0 EC001423
- ECLASS 11.0 19170411
- ETIM 3.0 EC001423
- ETIM 6.0 EC001467
- UNSPSC 11 39121008
- Signal ± 1 kV
- ECLASS 7.0 19179290
- Test result 15g, 11 ms period, half-sine shock pulse
- REACh SVHC Lead 7439-92-1
- Contact discharge ± 6 kV
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 5.0 27230200
- ECLASS 4.0 27230200
- Connection in acc. with standard CUL
- ECLASS 4.1 27230200
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
2708384
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨