2701537 Phoenix Contact Programmable Logic Controllers

2701537 Product Details

• Depth
  38 mm
• Degree of protection
  IP65/IP67
• Mounting type
  Wall mounting or DIN rail mounting; both with mounting plate.
• Designation
  Actuators (UA)
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Height
  185 mm
• Drill hole spacing
  198.5 mm
• Permissible humidity (operation)
  5 % ... 95 %
• Air pressure (operation)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Net weight
  714.4 g
• Connection method
  M12 connector, double occupancy
• Protocols supported
  SNMP v1
• Current consumption
  typ. 30 mA ±15 % (at 24 V DC)
• Number of inputs
  8
• China RoHS
  Environmentally Friendly Use Period = 25;
• Protection class
  III (IEC 61140, EN 61140, VDE 0140-1)
• ECLASS 5.1
  27242600
• ECLASS 5.0
  27242200
• ETIM 2.0
  EC001433
• ETIM 7.0
  EC001599
Width
60 mm
Note on dimensions
The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).
Ambient temperature (operation)
-25 °C ... 60 °C
Permissible humidity (storage/transport)
5 % ... 95 %
Housing material
Zinc die-cast
Designation connection point
Copper cable
Equipment type
Modbus slave (server)
Number of outputs
8
Output current when switched off
max. 20 µA
ECLASS 10.0.1
27242604
ECLASS 6.0
27242600
UNSPSC 18.0
32151602
Ambient temperature (storage/transport)
-25 °C ... 85 °C
Number
2
Number of positions
4
Interference emission
Noise emission test as per EN 61000-6-4 Class A
ECLASS 4.1
27240400
ETIM 4.0
EC001599
UNSPSC 12.01
39121311
Note on the connection method
D-coded
ECLASS 4.0
27240400
ECLASS 7.0
27242604
ETIM 3.0
EC001599
ETIM 6.0
EC001599
UNSPSC 19.0
32151602
UNSPSC 21.0
32151602
Transmission speed
10/100 Mbps (with auto negotiation)
Input voltage range "0" signal
0 V ... 5 V DC
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
Protective circuit
Overload protection, short-circuit protection of outputs yes
Output name
Digital outputs
System-specific protocols
Modbus protocols Modbus/TCP
Nominal input voltage UIN
24 V DC
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Input name
Digital inputs
Nominal input current at UIN
typ. 3 mA
REACh SVHC
Lead 7439-92-1
Specification
Modbus application protocol V1.1b
Supply voltage range
18 V DC ... 31.2 V DC (including all tolerances, including ripple)
Description of the input
EN 61131-2 types 1 and 3
Input voltage range "1" signal
11 V DC ... 30 V DC
Supply voltage
24 V DC
Connection technology
3-conductor
Input filter time
< 1000 µs
UNSPSC 6.01
43172015
Output voltage
24 V DC
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
ECLASS 11.0
27242604
UNSPSC 7.0901
43201404
UNSPSC 20.0
32151602
Switching frequency
max. 5500 per second (with at least 50 mA load current)
ECLASS 9.0
27242604
UNSPSC 11
39121311
UNSPSC 13.2
32151602
Nominal output voltage
24 V DC (from voltage UA)
Nominal load, ohmic
12 W (48 Ω, with nominal voltage)
Behavior with overload
Auto restart
Output voltage when switched off
max. 1 V
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
Nominal load, inductive
12 VA (1.2 H, 48 Ω, with nominal voltage)
Reverse voltage resistance to short pulses
Reverse voltage proof
Cable length
max. 30 m (To the sensor)
Test section
24 V supply (communications power and sensor supply, digital inputs)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m

Product condition