2701516 Phoenix Contact Programmable Logic Controllers

2701516 Product Details

• Depth
  38 mm
• Air pressure (storage/transport)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Housing material
  Zinc die-cast
• Number of positions
  4
• Protocols supported
  SNMP v1
• Input name
  Digital inputs
• Test section
  24 V supply (communications power and sensor supply, digital inputs)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min.
• Mechanical tests
  Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
• China RoHS
  Environmentally Friendly Use Period = 25;
• ECLASS 4.0
  27240400
• ETIM 2.0
  EC001433
• UNSPSC 12.01
  39121311
• UNSPSC 21.0
  32151602
• Note on dimensions
  The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate).
• ECLASS 7.0
  27242604
• Air pressure (operation)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Designation connection point
  Copper cable
• Note on the connection method
  D-coded
• Supply voltage
  24 V DC
• Nominal input current at UIN
  typ. 3 mA
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27242600
UNSPSC 7.0901
43201404
UNSPSC 19.0
32151602
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Drill hole spacing
198.5 mm
Permissible humidity (operation)
5 % ... 95 %
Net weight
717.4 g
Designation
Actuators (UA) for additional devices
Number of supported application relationships (AR)
2
Current consumption
typ. 3 mA ±15 % (at 24 V DC)
Description of the input
EN 61131-2 types 1 and 3
Input voltage range "0" signal
0 V ... 5 V DC
Input filter time
< 1000 µs
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
ECLASS 10.0.1
27242604
ECLASS 11.0
27242604
Height
185 mm
Permissible humidity (storage/transport)
5 % ... 95 %
Ambient temperature (storage/transport)
-25 °C ... 85 °C
Connection method
M12 connector, double occupancy
Transmission speed
100 Mbps (with auto negotiation)
System-specific protocols
PROFINET protocols LLDP
Number of inputs
16
Protective circuit
Overload protection, short-circuit protection of sensor supply
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
ECLASS 4.1
27240400
ECLASS 9.0
27242604
ETIM 4.0
EC001599
Width
60 mm
Ambient temperature (operation)
-25 °C ... 60 °C
Degree of protection
IP65/IP67
Mounting type
Wall mounting or DIN rail mounting; both with mounting plate.
Number
2
Equipment type
PROFINET-Device
Conformance class
B
Connection technology
4-conductor
Nominal input voltage UIN
24 V DC
Input voltage range "1" signal
11 V DC ... 30 V DC
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
Interference emission
Noise emission test as per EN 61000-6-4 Class A
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 5.0
27242200
ECLASS 6.0
27242600
ETIM 3.0
EC001599
Supply voltage range
18 V DC ... 31.2 V DC (including all tolerances, including ripple)
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
UNSPSC 6.01
43172015
UNSPSC 13.2
32151602
UNSPSC 20.0
32151602
ETIM 7.0
EC001599
UNSPSC 11
39121311
ETIM 6.0
EC001599
UNSPSC 18.0
32151602

Product condition