2700988 Phoenix Contact Programmable Logic Controllers
Part#:2700988
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Axio control for direct open-loop control of Axioline I/Os. With 2 Ethernet interfaces and programming capabilities according to IEC 61131-3. Complete with connector connector and labeling field.
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Programmable Logic Controllers that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2700988 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Weight195 g
- Number of local bus devices that can be connected max. 63 (observe current consumption)
- Typical current consumption 125 mA
- Degree of protection IP20
- Permissible humidity (operation) 5 % ... 95 % (according to DIN EN 61131-2, non-condensing, no ice formation)
- Vibration (operation) 5g
- Engineering tool PC WORX
- Number of control tasks 8
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (operation) -25 °C ... 60 °C up to 2000 m above mean sea level
- Shock 30g, 11 ms period, half-sine shock pulse, according to IEC 60068-2-27
- Diagnostics tool DIAG+
- Realtime clock Yes
- Accuracy realtime clock 1.73 s/day = 20 ppm at 25 °C
- Connection method Micro USB type B
- Residual ripple ± 5 %
- Processor Altera Nios II 1x 100 MHz
- Air pressure (storage/transport) 58 kPa ... 106 kPa (up to 4500 m above mean sea level)
- Configuration tool Config+ Version 1.01 or later
- Retentive mass storage 48 kByte (NVRAM)
- Device function PROFINET controller, PROFINET device
- Update rate min. 32 ms (16 devices)
- Supply voltage 24 V DC
- Note on weight specifications with connector and bus base module
- Note on controller redundancy applicative system redundancy possible
- Safety function No
- Immunity to burst Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
- ECLASS 11.0 27242207
- Width 45 mm
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Height 126.1 mm
- Programming languages supported Programming in acc. with IEC 61131-3
- Mass storage 2 Mbyte
- Number of supported devices max. 63 (per station)
- Interface Service
- Specification Version 2.3
- Power dissipation max. 3 W
- Diagnostics display No
- Interference emission Noise emission test according to EN 61000-6-3 Class B
- Immunity to conducted interference Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
- ECLASS 4.1 27240600
- ECLASS 4.0 27240600
- ECLASS 9.0 27242207
- Depth 74 mm
- Permissible humidity (storage/transport) 5 % ... 95 % (according to DIN EN 61131-2, non-condensing, no ice formation)
- Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level)
- Program memory 2 Mbyte
- Amount of process data max. 8192 Bit (per station)
- Transmission speed max. 115.2 kbps
- Number 1
- Supply voltage range 19.2 V DC ... 30 V DC
- Max. current consumption 160 mA
- Vibration (storage/transport) 5g
- ECLASS 7.0 27242207
- ETIM 4.0 EC001435
- Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
- Immunity to ESD Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 8 kV air discharge
- Immunity to surge Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical), fieldbus cable shield: ±1 kV
- REACh SVHC Lead 7439-92-1
- ECLASS 5.0 27242700
- ETIM 3.0 EC001045
- UNSPSC 12.01 81111810
- UNSPSC 21.0 39122114
- UNSPSC 13.2 39122114
- UNSPSC 20.0 39122114
- UNSPSC 18.0 39122114
- UNSPSC 6.01 81111810
- Immunity to EF Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
- Controller redundancy yes
- ECLASS 5.1 27242700
- UNSPSC 7.0901 81111810
- ETIM 7.0 EC000236
- ETIM 6.0 EC000236
- ECLASS 10.0.1 27242207
- ECLASS 6.0 27242200
- UNSPSC 11 81111810
- UNSPSC 19.0 39122114
- Shock (operation) 10g (Bump endurance test according to DIN EN 60068-2-27)
- China RoHS Environmentally Friendly Use Period = 50 years
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
