2700589 Phoenix Contact Electrical Safety Devices
Part#:2700589
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 3
Apr 24, 2024
About the product: Coupling relay for SIL 3 high and low-demand applications, couples digital output signals to the I/O, 2 enabling current paths, 1 digital signal output, safe state off applications, test pulse filter, pluggable Push-in terminal block
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2700589 Phoenix Contact price in the box on the right side or send a quick quote.
2700589 Product Details
- ETIM 7.0 EC001449
- Width 12.5 mm
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Rated control circuit supply voltage US 24 V DC -15 % / +10 % (A1/A2)
- Inrush current min. 3 mA
- Current consumption < 5 mA
- Switching frequency max. 0.5 Hz
- Current max. 100 mA
- Short-circuit protection no
- Nominal operating mode 100% operating factor
- Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
- Degree of protection IP20
- Indication 1 x red LED
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- Rated insulation voltage 250 V AC
- Vibration (operation) 2g
- IECEx Ex nA nC IIC T4 Gc
- REACh SVHC Lead 7439-92-1
- ECLASS 6.0 27371800
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (operation) -40 °C ... 70 °C (observe derating)
- Rated control supply current IS typ. 75 mA (depending on load M1 +100 mA)
- Filter time max. 2 ms (at A1-A2; test pulse width)
- Protective circuit Serial protection against polarity reversal 33 V suppressor diode
- Number of outputs 1 (non-safety-related)
- Limiting continuous current 6 A (High demand)
- Designation Air clearances and creepage distances between the power circuits
- Net weight 196 g
- Mounting type DIN rail mounting
- Housing color yellow
- pluggable Yes
- Stop category 0
- Standards/regulations DIN EN 50178, EN 60079-15
- ATEX II 3 G Ex nA nC IIC T4 Gc
- Environmental simulation test ISA-S71.04 (G3)
- ECLASS 4.0 40020600
- ECLASS 5.0 27371900
- Height 116.6 mm
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Maximum altitude ≤ 2000 m (Above sea level)
- Input voltage range "0" signal 0 V DC ... 5 V DC (for safe Off)
- Number of inputs 2 (Non-safety-related start inputs: Y1/Y2)
- Max. permissible overall conductor resistance 150 Ω
- Voltage at input/start and feedback circuit 24 V DC -15 % / +10 %
- Switching capacity min. 60 mW
- Mechanical service life 10x 106 cycles
- Maximum inrush current 500 mA (Δt = 1 ms at Us)
- Recovery time 500 ms
- Assembly instructions See derating curve
- Housing material PBT
- Connection method Push-in connection
- Stripping length 8 mm
- Rated surge voltage/insulation Safe isolation, 6 kV reinforced insulation from control circuit, start circuit, signal output to the enabling current paths, 4 kV/basic insulation between the enabling current paths and between all current paths and housing
- Conformance CE-compliant
- UL, USA/Canada cULus
- ECLASS 10.0.1 27371819
- ECLASS 9.0 27371819
- Input name Start circuit
- Output description PNP
- Contact material AgSnO2
- Switching voltage min. 12 V AC/DC
- Switching capacity according to IEC 60947-5-1 4 A (24 V (DC13))
- Output fuse 150 mA fast blow
- Typical pickup time at US < 200 ms (when controlled via A1, automatic start)
- Typical release time at US < 35 ms (when controlled via A1)
- Min. degree of protection of inst. location IP54
- Status display 2 x green LEDs
- Conductor cross-section AWG 24 ... 16
- Conductor cross-section flexible with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Conductor cross-section flexible with ferrule and plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Shock 15g
- Overvoltage category III
- GL C, EMC2
- ECLASS 11.0 27371819
- ECLASS 7.0 27371819
- ETIM 6.0 EC001449
- Depth 114.5 mm
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Input current range "0" signal 0 mA ... 2 mA (for safe Off)
- Power consumption at US typ. 1.8 W
- Output name Enabling current path
- Contact type 2 enabling current paths
- Sq. Total current 60 A2 (observe derating)
- Voltage approx. 22 V DC (Us - 2 V)
- Mounting position vertical, horizontal, with front of module upward
- Operating voltage display 1 x yellow LED
- Conductor cross section flexible 0.2 mm² ... 1.5 mm²
- Safety Integrity Level (SIL) 3
- Degree of pollution 2
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 4.1 40020600
- ECLASS 5.1 27371900
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
This item can ship within 24h!
1-year warranty
$205.40
2700589
Stock:
3
Select Qty:
$205.40
$205.40 each
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
