2700570 Phoenix Contact Electrical Safety Devices
Part#:2700570
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 1
Nov 21, 2024
Safety relay for emergency stop, safety doors and light grids up to SILCL 3, Cat. 4, PL e, 1 or 2-channel operation, automatic or manual, monitored start, 3 enabling current paths, US = 24 V DC, pluggable Push-in terminal block
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2700570 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Width 12.5 mm
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Rated control supply current IS typ. 80 mA
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Power consumption at US typ. 1.92 W
- Input name Start circuit
- Input voltage range "1" signal 20.4 V DC ... 26.4 V DC
- Switching voltage min. 12 V AC/DC
- Voltage 22 V DC (Us - 2 V)
- Typical response time at US < 175 ms (automatic start)
- Mounting position vertical or horizontal
- Assembly instructions See derating curve
- pluggable Yes
- Conductor cross-section flexible with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Safety Integrity Level (SIL) 3
- Category 4
- Degree of pollution 2
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 5.1 27371900
- ETIM 7.0 EC001449
- UNSPSC 20.0 39122205
- Ambient temperature (operation) -40 °C ... 55 °C (observe derating)
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Inrush current min. 3 mA
- Input voltage range "0" signal 0 V DC ... 5 V DC (for safe Off; at S12 and S22)
- Max. permissible overall conductor resistance 150 Ω
- Output name Enabling current paths
- Contact type 3 enabling current paths
- Sq. Total current 48 A2 (observe derating)
- Mechanical service life 10x 106 cycles
- Short-circuit protection no
- Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
- Degree of protection IP20
- Status display 3 x green LED
- Conductor cross section flexible 0.2 mm² ... 1.5 mm²
- Rated insulation voltage 250 V AC
- REACh SVHC Lead 7439-92-1
- ECLASS 5.0 27371900
- ETIM 6.0 EC001449
- UNSPSC 18.0 39122205
- Height 116.6 mm
- Rated control circuit supply voltage US 24 V DC -15 % / +10 %
- Designation Air clearances and creepage distances between the power circuits
- Input current range "0" signal 0 mA ... 2 mA (for safe Off; at S12 and S22)
- Output description non-safety-related
- Switching capacity min. 60 mW
- Output fuse 6 A gL/gG (N/O contact)
- Net weight 139.89 g
- Housing color yellow
- Operating voltage display 1 x green LED
- Stop category 0
- Standards/regulations DIN EN 50178
- Shock 15g
- ECLASS 4.0 40020600
- ECLASS 9.0 27371819
- UNSPSC 19.0 39122205
- Depth 114.5 mm
- Maximum altitude ≤ 2000 m (Above sea level)
- Protective circuit Surge protection Suppressor diode
- Description of the input non-safety-related
- Number of inputs 1
- Number of outputs 1 (digital, PNP)
- Limiting continuous current 6 A (observe derating)
- Maximum inrush current 500 mA (Δt = 1 ms at Us)
- Current max. 100 mA
- Recovery time < 500 ms
- Nominal operating mode 100% operating factor
- Housing material PBT
- Connection method Push-in connection
- Conductor cross-section AWG 24 ... 16
- Conductor cross-section flexible with ferrule and plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Stripping length 8 mm
- Rated surge voltage/insulation Safe isolation, reinforced insulation 6 kV between input circuit and enabling current path (13/14) and enabling current path (23/24) and enabling current path (33/34)Basic insulation 4 kV between all current paths and housing
- Vibration (operation) 10 Hz ... 150 Hz, 2g
- ECLASS 11.0 27371819
- ECLASS 7.0 27371819
- UNSPSC 13.2 39121501
- Filter time max. 1.5 ms (at S12, S22; test pulse width)
- Current consumption < 10 mA (at S34/24 V)
- Protective circuit/component Suppressor diode
- Contact material AgSnO2
- Switching frequency 0.5 Hz
- Typical pickup time at US < 250 ms (when controlled via A1)
- Typical release time at US < 20 ms (when controlled via A1 or S12 and S22.)
- Mounting type DIN rail mounting
- Min. degree of protection of inst. location IP54
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- Performance level (PL) e (4 A DC13; 5 A AC15; 8760 switching cycles/year)
- Safety Integrity Level Claim Limit (SIL CL) 3
- Overvoltage category III
- ECLASS 10.0.1 27371819
- ECLASS 4.1 40020600
- ECLASS 6.0 27371800
- UNSPSC 21.0 39122205
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 5 days!
1-year warranty
$220.91
Stock:
1
Select Qty:
$220.91
$220.91 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
