2320908 Phoenix Contact AC/DC Power Supplies

2320908 Product Details

• Height with alternative assembly
  130 mm
• Degree of pollution
  2
• Frequency range DC
  0 Hz
• Input voltage range
  85 V AC ... 264 V AC
• Current consumption
  1.2 A (120 V AC)
• Protective circuit/component
  Varistor
• POWER BOOST (IBoost)
  7.5 A (-25°C ... 40°C permanent, UOUT = 24 V DC )
• Feedback voltage resistance
  max. 35 V DC
• Residual ripple
  < 40 mVPP (with nominal values)
• Insulation voltage input / PE
  3.5 kV AC (type test)
• Mounting position
  horizontal DIN rail NS 35, EN 60715
• Degree of protection
  IP20
• Discharge current to PE
  < 3.5 mA
• Inrush current
  < 15 A
• Input fuse
  5 A (slow-blow, internal)
• Nominal output current (IN)
  5 A (-25 °C ... 60 °C, UOUT = 24 V DC)
• Control deviation
  < 1 % (change in load, static 10 % ... 90 %)
• Power loss nominal load max.
  15 W
• Efficiency
  > 90 % (for 230 V AC and nominal values)
• Net weight
  0.7 kg
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Nominal input voltage range
100 V AC ... 240 V AC
AC frequency range
45 Hz ... 65 Hz
Nominal power consumption
141 VA
Type of protection
Transient surge protection
Nominal output voltage
24 V DC ±1 %
Connection in parallel
Yes, for redundancy and increased capacity
Connection in series
yes
Output power
120 W
Maximum power dissipation in no-load condition
3 W
MTBF (IEC 61709, SN 29500)
> 1134000 h (25 °C)
Insulation voltage output / PE
500 V DC (routine test)
Connection method
Pluggable screw connection
Screw thread
M3
Conductor cross section AWG min.
20
Contact discharge
4 kV (Test Level 2)
Frequency range
0.15 MHz ... 80 MHz
Comments
Criterion B
Vibration (operation)
< 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6)
Certificate
IEC 60950-1 (2nd Edition)
Rail applications
EN 50121-4
IECEx
Ex nA nC IIC T4 Gc
ECLASS 5.1
27049000
ECLASS 7.0
27049002
ECLASS 9.0
27040701
ETIM 6.0
EC002540
UNSPSC 11
39121004
UNSPSC 13.2
39121004
Dielectric strength maximum
300 V AC
Recommended breaker for input protection
6 A ... 16 A (AC: Characteristics B, C, D, K)
Mains buffering time
typ. 55 ms (120 V AC)
Setting range of the output voltage (USet)
18 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted)
Typical response time
< 0.15 s
Insulation voltage input/output
4 kV AC (type test)
Protection class
I
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible min.
0.2 mm²
Stripping length
7 mm
Noise immunity
EN 61000-6-2:2005
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Standards/regulations
EN 61000-6-3
Low Voltage Directive
Conformance with LV directive 2006/95/EC
Standard - Equipment safety
BG (design tested)
Shock
18 ms, 30g, in each space direction (according to IEC 60068-2-27)
DeviceNet approval
DeviceNet™ Power Supply Conformance Tested
ATEX
 II 3 G Ex nA nC IIC T4 Gc
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 6.0
27049000
ECLASS 5.0
27049000
ETIM 4.0
EC000599
ETIM 7.0
EC002540
ETIM 5.0
EC002540
UNSPSC 12.01
39121004
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section AWG max.
12
Noise emission
EN 55011 (EN 55022)
Connection in acc. with standard
CSA
Test field strength
3 V/m (Test Level 2)
Shipbuilding approval
DNV GL (EMC A)
Standard – Limitation of mains harmonic currents
EN 61000-3-2
UL approvals
UL/C-UL listed UL 508
Approval - requirement of the semiconductor industry with regard to mains voltage dips
SEMI F47-0706 Compliance Certificate
Noxious gas test
ISA-S71.04-1985 G3 Harsh Group A
Overvoltage category (EN 62477-1)
III
ECLASS 4.0
27040700
ECLASS 4.1
27040700
ECLASS 8.0
27049002
UNSPSC 6.01
30211502
UNSPSC 7.0901
39121004
Width with alternative assembly
122 mm
Depth
125 mm
Installation height
5000 m
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Selective Fuse Breaking (ISFB)
30 A (12 ms)
Protection against overvoltage at the output (OVP)
< 32 V DC
Voltage
10 V (Test Level 3)
Standard - Electrical safety
IEC 60950-1/VDE 0805 (SELV)
Max. permissible relative humidity (operation)
100 % (at 25 °C, non-condensing)
Derating
60 °C ... 70 °C (2.5%/K)
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Width
40 mm
Climatic class
3K3 (in acc. with EN 60721)
Standard – Safety extra-low voltage
IEC 60950-1 (SELV) and EN 60204-1 (PELV)
Height
130 mm
Depth with alternative assembly
43 mm
Ambient temperature (operation)
-40 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Standard - Safe isolation
DIN VDE 0100-410

Product condition