2313423 Phoenix Contact Data & Networking Devices

2313423 Product Details

• Ambient temperature (operation)
  -20 °C ... 60 °C
• Degree of protection
  IP20
• Bit distortion, output
  < 6.25 %
• Mounting type
  DIN rail mounting
• Operating mode
  Semi-duplex
• Minimum switching voltage
  10 V DC
• Identification
  DNV GL
• Test result
  15g, 11 ms period, half-sine shock pulse
• ECLASS 5.0
  27242700
• ETIM 3.0
  EC000698
• ETIM 4.0
  EC001423
• Type of test
  Shock in acc. with EN 60068-2-27/IEC 60068-2-27
• Standards/regulations
  DIN EN 50178, DIN EN 60950
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• ETIM 7.0
  EC001423
• Noise immunity
  EN 61000-6-2
• UNSPSC 7.0901
  39121008
• Electrical isolation
  according to EN 60950
• Transmission medium
  2-wire twisted pair, shielded
• Designation
  Air clearances and creepage distances
Maximum switching voltage
30 V DC
Additional text
Please follow the special installation instructions in the documentation!
Comments
Criterion B
Depth
121 mm
Height
111 mm
Bit distortion, input
± 35 %
ECLASS 7.0
27242208
Color
green
Nominal supply voltage
24 V DC
Interface 1
CAN interface, in accordance with ISO/IS 11898 for DeviceNet, CAN, CANopen
Width
35 mm
MTTF
1091 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
Connection method
COMBICON plug-in screw terminal block
No. of ports
2 (CAN_High / CAN_Low)
Contact type
N/O contact
ECLASS 9.0
27242208
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
UNSPSC 6.01
30211506
UNSPSC 20.0
39122114
Permissible humidity (operation)
30 % ... 95 % (non-condensing)
Bit delay
One telegram length (EXTENDED)
Limiting continuous current
500 mA
Temperature
B
Humidity
A
Noise emission
EN 55011
Net weight
233.466 g
Max. current consumption
80 mA
Status and diagnostic indicators
LEDs: VCC (supply voltage), NET A (Mod/Net status port A), NET B (Mod/Net status port B), ACT (activity/data traffic)
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Transmission method
CSMA/CA
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
24
Termination resistor
124 Ω (Integrated and ready to be switched)
Interface 2
CAN interface, in accordance with ISO/IS 11898 for DeviceNet, CAN, CANopen
Test voltage data interface/power supply
1.5 kVrms (50 Hz, 1 min.)
Altitude
≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Conductor cross section AWG max.
14
File format/coding
Bit stuffing, NRZ
Transmission length
≤ 5000 m (Dependent on the data rate and the protocol used)
Conductor cross section flexible max.
2.5 mm²
Number of bus devices
≤ 64 (per potential segment)
Conductor cross section solid max.
2.5 mm²
Output name
Relay output
Transmission speed
≤ 1 Mbps (Configurable via DIP switches)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27242700
Enclosure
Required protection according to the Rules shall be provided upon installation on board
Number of outputs
1
REACh SVHC
Lead 7439-92-1
Frequency range
80 MHz ... 3 GHz
EMC
B
ECLASS 4.0
27240400
ECLASS 10.0.1
27242208
ECLASS 11.0
27242208
Vibration
A
Free from substances that could impair the application of coating
according to P-VW 3.10.7 57 65 0 VW-AUDI-Seat central standard
Typical current consumption
55 mA (24 V DC)
Supply voltage range
10 V DC ... 30 V DC (via pluggable COMBICON screw terminal block)
UNSPSC 21.0
39122114
Housing material
PA 6.6-FR
UNSPSC 19.0
39122114
MTBF
823 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
UNSPSC 18.0
39122114
Signal
± 1 kV
ECLASS 4.1
27240400
UNSPSC 13.2
39122114
ETIM 6.0
EC001423
Conductor cross section flexible min.
0.2 mm²
Contact discharge
± 6 kV
UNSPSC 11
39121008
UNSPSC 12.01
39121008
ECLASS 6.0
27242200

Product condition