2313096 Phoenix Contact Data & Networking Devices

2313096 Product Details

• Height
  99 mm
• Bit distortion, input
  max. ± 35 %
• Supply voltage range
  18 V DC ... 30 V DC (via pluggable COMBICON screw terminal block)
• Data direction switching
  Automatic control, min. station response time 2 bits
• Conductor cross section AWG max.
  12
• Test voltage data interface/power supply
  1.5 kVrms (50 Hz, 1 min.)
• Net weight
  240.8 g
• Conductor cross section solid max.
  2.5 mm²
• Transmission speed
  4.8/9.6/19.2/38.4/57.6/75/93.75/115.2/136/187.5/375/500 kbps (Can be set manually)
• Housing material
  PA 6.6-FR
• Depth
  105 mm
• File format/coding
  UART (11/10 bit switchable; NRZ)
• Transmission length
  ≤ 1200 m (depends on transmission speed, bus system and cable type)
• Conductor cross section AWG min.
  24
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Type of test
  Shock in acc. with EN 60068-2-27/IEC 60068-2-27
• Comments
  Criterion B
• REACh SVHC
  Lead 7439-92-1
• ECLASS 5.0
  27242200
• ETIM 4.0
  EC000698
UNSPSC 12.01
39121008
UNSPSC 19.0
43222604
Degree of protection
IP20
Test voltage data interfaces
1.5 kV
Mounting type
DIN rail mounting
Interface 1
RS-485 interface, in acc. with EIA/TIA-485, DIN 66259-4/RS-485 2-wire
Electrical isolation
VCC // TBUS // RS-485 (A) // RS-485 (B)
Termination resistor
390 Ω (Can be connected to port A and B)
Conductor cross section solid min.
0.2 mm²
Additional text
Please follow the special installation instructions in the documentation!
Shock
15g in all directions in acc. with IEC 60068-2-27
ECLASS 11.0
19179090
ECLASS 10.0.1
19179290
ETIM 3.0
EC000698
UNSPSC 7.0901
39121008
UNSPSC 11
39121008
Noise emission
EN 55011
MTBF
1247 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
Caption
Housing dimensions
Altitude
≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Connection in acc. with standard
CUL
Max. current consumption
≤ 2 A (For operation in a connection station, via the DIN rail connector)
Width
35 mm
Connection method
Pluggable screw connection
MTTF
1439 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
Conductor cross section flexible min.
0.2 mm²
Identification
ISA-S71.04-1985 G3 Harsh Group A
Frequency range
80 MHz ... 3 GHz
Test result
15g, 11 ms period, half-sine shock pulse
Signal
± 1 kV
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 2.0
EC000698
ETIM 6.0
EC000310
UNSPSC 6.01
30211506
UNSPSC 20.0
43222604
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
Noise immunity
EN 61000-4-2
Bit delay
< 1 bit
Color
green
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (operation)
-20 °C ... 60 °C
Bit distortion, output
< 6.25 %
Typical current consumption
75 mA (24 V DC )
Nominal supply voltage
24 V DC (in acc. with UL)
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Transmission medium
2-wire twisted pair, shielded
Vibration (operation)
in acc. with IEC 60068-2-6: 5g, 150 Hz
Free from substances that could impair the application of coating
according to P-VW 3.10.7 57 65 0 VW-AUDI-Seat central standard
ECLASS 4.1
27250300
ECLASS 9.0
19179290
ECLASS 7.0
19179290
UNSPSC 13.2
43222604
UNSPSC 21.0
43222604
Transmission channels
2 (1/1), TD, RD, half duplex
Conductor cross section flexible max.
2.5 mm²
Designation
Air clearances and creepage distances
Contact discharge
± 6 kV
Standards/regulations
DIN EN 50178, DIN EN 60950
ECLASS 6.0
19179200
ECLASS 5.1
27242200
ECLASS 4.0
27250300
ETIM 7.0
EC000310
UNSPSC 18.0
43222604

Product condition