2130172 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Number of connections
  2
• Flammability rating according to UL 94
  V0
• Nominal current IN
  232 A
• Result of surge voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Bending test conductor cross section/weight
  25 mm² / 4.5 kg
• Nominal cross section
  95 mm²
• Degree of pollution
  3
• Insulating material group
  II
• Power frequency withstand voltage setpoint
  2.2 kV
• Bending test turns
  135
• Tractive force setpoint
  351 N
• Setpoint
  15 N
• Result of temperature-rise test
  Test passed
• Height NS 35/15
  86 mm
• Conductor cross section solid max.
  95 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  95 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
  16 mm²
• Ambient temperature (storage/transport)
  -25 °C ... 55 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141100
ETIM 2.0
EC000897
ETIM 6.0
EC000897
UNSPSC 19.0
39121410
Insulating material
PA
Maximum power dissipation for nominal condition
7.54 W
Maximum load current
232 A (with 95 mm² conductor cross section)
Nominal voltage UN
1000 V
Tensile test result
Test passed
Conductor cross section tensile test
95 mm²
Short-time current
11.4 kA
Conductor cross section short circuit testing
95 mm²
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Conductor cross section AWG min.
3
Conductor cross section flexible, with ferrule with plastic sleeve min.
35 mm²
2 conductors with same cross section, solid min.
25 mm²
Screw thread
M8
Tightening torque, min
15 Nm
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27141120
ECLASS 5.1
27141100
ETIM 7.0
EC000897
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Number of levels
1
Rated surge voltage
8 kV
Connection in acc. with standard
CSA
Result of power-frequency withstand voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
120 °C
Conductor cross section solid min.
25 mm²
Conductor cross section AWG max.
3/0
Conductor cross section flexible, with ferrule without plastic sleeve max.
95 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
35 mm²
Power rail
30 mm x 5 mm
Permissible humidity (storage/transport)
30 % ... 70 %
REACh SVHC
Lead 7439-92-1
ECLASS 6.0
27141100
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Overvoltage category
III
Open side panel
No
Surge voltage test setpoint
9.8 kV
Bending test rotation speed
10 rpm
Requirements, voltage drop
≤ 3.2 mV
Proof of thermal characteristics (needle flame) effective duration
30 s
Width
40 mm
Conductor cross section flexible min.
35 mm²
Conductor cross section flexible max.
95 mm²
2 conductors with same cross section, stranded max.
35 mm²
Stripping length
29 mm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ETIM 3.0
EC000897
UNSPSC 20.0
39121410
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Length
118.5 mm
Connection method
Screw connection
Conductor cross section flexible, with ferrule without plastic sleeve min.
35 mm²
2 conductors with same cross section, stranded min.
25 mm²
2 conductors with same cross section, solid max.
35 mm²
Tightening torque max
20 Nm
Operating temperature
-60 °C ... 85 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
UNSPSC 12.01
39121410