2130127 Phoenix Contact Terminal Blocks
Part#:2130127
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Universal terminal block with mixed connection, cross section: 35 - 95 mm², AWG: 2 - 4/0, width: 40 mm, color: gray
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2130127 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Nominal cross section 95 mm²
- Insulating material group II
- Maximum load current 232 A (with 95 mm² conductor cross section)
- Result of surge voltage test Test passed
- Power frequency withstand voltage setpoint 2.2 kV
- Result of tight fit on support Test passed
- Requirements, voltage drop U1 ≤ 3.2 mV
- Width 40 mm
- Cable lug connection according to standard DIN 46235:1983-07
- Screw thread M8
- Bolt diameter 12 mm
- Conductor cross section solid max. 95 mm²
- Color gray
- Rated surge voltage 8 kV
- Nominal current IN (upper level) 232 A
- Surge voltage test setpoint 9.8 kV
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Tensile test result Test passed
- Result of voltage-drop test Test passed
- Result of temperature-rise test Test passed
- Result of thermal test Test passed
- Min. cross section for cable lug connection 25 mm²
- Tightening torque, min 15 Nm
- Conductor cross section flexible min. 35 mm²
- Conductor cross section AWG max. 3/0
- Conductor cross section flexible, with ferrule without plastic sleeve max. 95 mm²
- 2 conductors with same cross section, stranded max. 35 mm²
- Operating temperature -60 °C ... 85 °C
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 9.0 27141120
- ETIM 7.0 EC000897
- UNSPSC 13.2 39121410
- Number of connections 2
- Flammability rating according to UL 94 V0
- Overvoltage category III
- Connection in acc. with standard CSA
- Open side panel No
- Bending test conductor cross section/weight 25 mm² / 4.5 kg
- Result of flexion and pull-out test Test passed
- Short circuit stability result Test passed
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Connection method Screw connection
- Max. cross section for cable lug connection 95 mm²
- Power rail 30 mm x 5 mm
- Conductor cross section AWG min. 3
- 2 conductors with same cross section, solid max. 35 mm²
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum 35 mm²
- Ambient temperature (storage/transport) -25 °C ... 55 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- ECLASS 4.1 27141100
- ECLASS 7.0 27141120
- ETIM 4.0 EC000897
- UNSPSC 11 39121410
- UNSPSC 18.0 39121410
- Number of levels 1
- Nominal current IN 232 A
- Maximum load current (upper level) 232 A (with 95 mm² conductor cross section)
- Result of power-frequency withstand voltage test Test passed
- Tractive force setpoint 351 N
- Setpoint 15 N
- Short-time current 11.4 kA
- Relative insulation material temperature index (Elec., UL 746 B) 120 °C
- Height NS 35/15 86 mm
- Note 2-conductor connection only on terminal sleeve side
- Tightening torque max 20 Nm
- Conductor cross section flexible max. 95 mm²
- 2 conductors with same cross section, solid min. 25 mm²
- 2 conductors with same cross section, stranded min. 25 mm²
- REACh SVHC Lead 7439-92-1
- ECLASS 4.0 27141100
- ECLASS 5.1 27141100
- ETIM 6.0 EC000897
- UNSPSC 12.01 39121410
- UNSPSC 20.0 39121410
- Insulating material PA
- Degree of pollution 3
- Maximum power dissipation for nominal condition 7.54 W
- Nominal voltage UN 1000 V
- Conductor cross section tensile test 95 mm²
- Tight fit on carrier NS 32/NS 35
- Conductor cross section short circuit testing 95 mm²
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C
- Length 114 mm
- Hole diameter, min. 13 mm
- Stripping length 29 mm
- Conductor cross section solid min. 25 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve min. 35 mm²
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum 16 mm²
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 10.0.1 27141120
- ECLASS 5.0 27141100
- ETIM 2.0 EC000897
- UNSPSC 6.01 30211811
- UNSPSC 19.0 39121410
- Conductor cross section flexible, with ferrule without plastic sleeve min. 35 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve max. 95 mm²
- Permissible humidity (storage/transport) 30 % ... 70 %
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 11.0 27141120
- ECLASS 6.0 27141100
- ETIM 3.0 EC000897
- UNSPSC 7.0901 39121410
- UNSPSC 21.0 39121410
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨