2130012 Phoenix Contact Terminal Blocks

Product Details

• Color
  red
• Insulating material group
  II
• Result of surge voltage test
  Test passed
• Result of voltage-drop test
  Test passed
• Short circuit stability result
  Test passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Connection
  1 level
• Overvoltage category
  III
• Nominal current IN
  232 A
• Open side panel
  No
• Max. cross section for cable lug connection
  95 mm²
• Potentials
  1
• Flammability rating according to UL 94
  V0
• Nominal voltage UN
  1000 V
• Number of connections
  2
• Insulating material
  PA
• Degree of pollution
  3
• Result of power-frequency withstand voltage test
  Test passed
• Tight fit on carrier
  NS 32/NS 35
• Conductor cross section short circuit testing
  95 mm²
Relative insulation material temperature index (Elec., UL 746 B)
120 °C
Connection method
Bolt connection
Min. cross section for cable lug connection
25 mm²
Screw thread
M12
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141120
ETIM 3.0
EC000897
ETIM 4.0
EC000897
UNSPSC 11
39121410
Number of levels
1
Rated surge voltage
8 kV
Maximum load current
232 A (with 95 mm² conductor cross section)
Note
When using ring cable lugs without insulation, a cover has to be used. A partition plate has to be installed on both sides.
Result of tight fit on support
Test passed
Setpoint
15 N
Result of thermal test
Test passed
Static insulating material application in cold
-40 °C
Height NS 35/15
56 mm
Cable lug connection according to standard
DIN 46235:1983-07
Bolt diameter
12 mm
Ambient temperature (storage/transport)
-25 °C ... 55 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141120
ECLASS 5.1
27141120
Power frequency withstand voltage setpoint
2.2 kV
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
11.4 kA
Width
40 mm
Stripping length
The stripping length depends on the specification provided by the cable lug manufacturer.
Hole diameter, min.
13 mm
Power rail
30 mm x 5 mm
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Length
110 mm
Connection in acc. with standard
IEC 60947-7-1
Tightening torque, min
25 Nm
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
Tightening torque max
30 Nm
Operating temperature
-60 °C ... 85 °C
ECLASS 4.0
27141120
ETIM 2.0
EC000897
ETIM 7.0
EC000897
UNSPSC 12.01
39121410