2130006 Phoenix Contact Terminal Blocks

Product Details

• Tightening torque max
  20 Nm
• Flammability rating according to UL 94
  V0
• Degree of pollution
  3
• Nominal voltage UN
  1000 V
• Note
  Depending on the manufacturer information on the cable lug.
• Bending test rotation speed
  10 rpm
• Test spectrum
  Service life test category 2, bogie-mounted
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Height NS 35/15
  53 mm
• Stripping length
  The stripping length depends on the specification provided by the cable lug manufacturer.
• Min. cross section for cable lug connection
  16 mm²
• Power rail
  15 mm x 3 mm
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• ECLASS 5.0
  27141120
• ETIM 2.0
  EC000897
• ETIM 4.0
  EC000897
• UNSPSC 13.2
  39121410
• Number of connections
  2
• Insulating material
  PA
• Insulating material group
  II
Maximum load current
101 A (with 25 mm² conductor cross section)
Surge voltage test setpoint
9.8 kV
Result of tight fit on support
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
120 °C
Cable lug connection according to standard
DIN 46235:1983-07
Cable lug width, max.
16 mm
Nominal cross section
25 mm²
Overvoltage category
III
Nominal current IN
101 A
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Result of voltage-drop test
Test passed
Acceleration
30g
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Length
88 mm
Connection method
Bolt connection
Screw thread
M8
Ambient temperature (storage/transport)
-25 °C ... 55 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141120
ECLASS 5.1
27141120
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
Number of levels
1
Color
red
Maximum power dissipation for nominal condition
3.26 W
Open side panel
No
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of temperature-rise test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Semi-sinusoidal
Width
26 mm
Connection in acc. with standard
IEC 60947-7-1
Hole diameter, min.
8.4 mm
Tightening torque, min
15 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 7.0
EC000897
UNSPSC 7.0901
39121410
Potentials
1
Rated surge voltage
8 kV
Power frequency withstand voltage setpoint
2.2 kV
Bending test turns
135
Tight fit on carrier
NS 32/NS 35
Ageing test for screwless modular terminal block temperature cycles
192
Shock duration
18 ms
Number of shocks per direction
3
Connection
1 level
Max. cross section for cable lug connection
25 mm²
Bolt diameter
8 mm
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141120
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 11
39121410
Operating temperature
-60 °C ... 85 °C
ECLASS 6.0
27141100
UNSPSC 6.01
30211811