1923160 Phoenix Contact Terminal Blocks

Product Details

• ECLASS 7.0
  27141120
• Number of levels
  2
• Rated surge voltage
  6 kV
• Flammability rating according to UL 94
  V2
• Tractive force setpoint
  60 N
• Result of temperature-rise test
  Test passed
• Short-time current
  0.00048 kA
• Shock form
  Half-sine
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Width
  6.2 mm
• Height NS 32
  52 mm
• Tightening torque, min
  0.6 Nm
• Conductor cross section flexible min.
  0.2 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.25 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.25 mm²
• 2 conductors with same cross section, solid max.
  1.5 mm²
• Internal cylindrical gage
  A4
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 11.0
  27141120
• ECLASS 5.0
  27141100
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Number of positions
1
Color
green
Overvoltage category
III
Nominal voltage UN
500 V (With tightened clamping screws)
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection
1 level
Conductor cross section solid min.
0.2 mm²
Max. AWG conductor cross section, flexible
12
Cross section with insertion bridge, solid max.
4 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
China RoHS
Environmentally Friendly Use Period = 50 years
Number of connections
3
Insulating material
PA
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Finger protection
guaranteed
Bending test rotation speed
10 (+/- 2) rpm
Power frequency withstand voltage setpoint
1.89 kV
Conductor cross section tensile test
4 mm²
Setpoint
1 N
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Acceleration
30g
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
50.5 mm
Screw thread
M3
Tightening torque max
0.8 Nm
Conductor cross section solid max.
4 mm²
UNSPSC 19.0
39121410
Potentials
1
Insulating material group
I
Degree of pollution
3
Surge voltage test setpoint
7.2 kV
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Tight fit on carrier
NS 32/NS 35
Requirements, voltage drop
U1 ≤ 3,2 mVU2 ≤ 1,5 x U1dT ≤ 45 K
Short circuit stability result
Test passed
Result of thermal test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2 mm
Height NS 35/7,5
47 mm
Connection method
Screw connection
Connection in acc. with standard
CSA
Conductor cross section flexible max.
4 mm²
UNSPSC 20.0
39121410
Nominal cross section
4 mm²
Nominal current IN
32 A (with 4 mm² conductor cross section)
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Conductor cross section short circuit testing
4000000 mm²
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/15
54.5 mm
Stripping length
8 mm
Conductor cross section AWG max.
12
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, solid min.
0.2 mm²
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
Maximum load current
32 A (in case of a 4 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
ECLASS 4.1
27141100
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
Conductor cross section AWG min.
24
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 9.0
27141120
ETIM 4.0
EC000897
ETIM 7.0
EC000897
Cross section with insertion bridge, stranded max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 10.0.1
27141120
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27141100
UNSPSC 11
39121410