1803604 Phoenix Contact Electrical Measuring & Monitoring Instruments

1803604 Product Details

• Number of connections
  5
• Rated voltage (II/2)
  320 V
• Rated voltage (III/3)
  160 V
• Conductor cross section solid
  0.14 mm² ... 1.5 mm²
• Nom. voltage
  160 V
• Rated surge voltage (II/2)
  2.5 kV
• Side guide rails
  yes
• Nominal current
  8 A
• Rated surge voltage (III/3)
  2.5 kV
• pluggable
  Yes
• Rated voltage (III/2)
  160 V
• Insulating material
  PA
• Number of positions
  20
• Number of potentials
  5
• Conductor cross section flexible, with ferrule without plastic sleeve
  0.25 mm² ... 1.5 mm²
• 2 conductors with same cross section, flexible
  0.08 mm² ... 0.75 mm²
• 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
  0.5 mm² ... 0.5 mm²
• Torque
  0.22 Nm ... 0.25 Nm
• Caption
  Type: MC 1,5/...-ST-3,81 with MC 1,5/...-G-3,81
• Height [ h ]
  11.1 mm
Pull-out test
IEC 60999-1:1999-11
No. of cycles
25
Polarization and coding
IEC 60512-13-5:2006-02
Minimum clearance - inhomogeneous field (II/2)
1.5 mm
Note on connection cross section
With connected conductor 1.5 mm² (solid).
Contact resistance R1
1.3 mΩ
Range of articles
MC 1,5/..-ST
Conductor cross section flexible
0.14 mm² ... 1.5 mm²
Pitch
3.81 mm
Drive form screw head
Slotted (L)
Conductor cross section AWG / kcmil
28 ... 16
2 conductors with same cross section, flexible, with ferrule without plastic sleeve
0.25 mm² ... 0.34 mm²
Metal surface terminal point (top layer)
Tin (4 - 8 µm Sn)
Metal surface contact area (top layer)
Tin (4 - 8 µm Sn)
Glow wire flammability index GWFI according to EN 60695-2-12
850
Width [ w ]
19.84 mm
Ambient temperature (assembly)
-5 °C ... 100 °C
Dimension check
IEC 60512-1-2:2002-02
Withdraw strength per pos. approx.
4 N
Clearances and creepage distances
IEC 60664-1:2007-04
Specification
IEC 61984:2008-10
Insertion/withdrawal cycles
25
Thermal stress
100 °C/168 h
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27460202
ECLASS 7.0
27440309
ETIM 3.0
EC001121
UNSPSC 20.0
39121409
Type of contact
Female connector
Number of levels
1
Rated surge voltage (III/2)
2.5 kV
2 conductors with same cross section, solid
0.08 mm² ... 0.5 mm²
Note
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Surface characteristics
hot-dip tin-plated
Glow wire ignition temperature GWIT according to EN 60695-2-13
775
Temperature for the ball pressure test according to EN 60695-10-2
125 °C
Pieces per package
250
Denomination packing units
Pcs.
Test specification
IEC 61984
Visual inspection
IEC 60512-1-1:2002-02
Contact holder in insert
IEC 60512-15-1:2008-05
Minimum creepage distance value (II/2)
1.6 mm
Polarization when inserted requirement >20 N
Test passed
Contact resistance R2
1.5 mΩ
Result, degree of protection, IP code
Finger safety with IP20 test finger
ECLASS 4.1
27260700
ECLASS 5.1
27260700
ETIM 7.0
EC002638
UNSPSC 13.2
39121409
UNSPSC 21.0
39121409
Brief article description
PCB connector
Plug-in system
MINI COMBICON
Screw thread
M2
Locking
without
Connection method
Screw connection with tension sleeve
Conductor cross section, flexible, with ferrule, with plastic sleeve
0.25 mm² ... 0.5 mm²
Stripping length
7 mm
Housing color
green (6021)
Flammability rating according to UL 94
V0
Length [ l ]
16.1 mm
Height (without solder pin)
11.1 mm
Ambient temperature (operation)
-40 °C ... 100 °C (dependent on the derating curve)
Test for conductor damage and slackening
IEC 60999-1:1999-11
Insertion and withdrawal force
IEC 60512-13-2:2006-02
Minimum clearance - inhomogeneous field (III/3)
1.5 mm
Minimum creepage distance value (III/3)
2 mm
Impulse withstand voltage at sea level
2.95 kV
Cold stress
-40 °C/2 h
ECLASS 5.0
27260700
ETIM 6.0
EC002638
UNSPSC 11
39121409
UNSPSC 19.0
39121409
UNSPSC 18.0
39121409
Cylindrical gauge a x b / diameter
2.4 mm x 1.5 mm / 1.6 mm
Contact material
Cu alloy
Insulating material group
I
CTI according to IEC 60112
600
Type of packaging
packed in cardboard
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Conductor cross section / conductor type / tensile force
0.14 mm² / solid / > 7 N
Resistance of inscriptions
IEC 60068-2-70:1995-12
Insertion strength per pos. approx.
6 N
Test force per pos.
21 N
Minimum clearance - inhomogeneous field (III/2)
1.5 mm
Minimum creepage distance value (III/2)
1.5 mm
Contact holder in insert requirements >20 N
Test passed
Corrosive stress
0.2 dm3 SO2 on 300 dm3/40 °C/1 cycle
Upper limiting temperature requirements <100 °C
Test passed
Power-frequency withstand voltage
1.39 kV
ETIM 4.0
EC002638
ECLASS 9.0
27440309
UNSPSC 7.0901
39121409
ECLASS 10.0.1
27440309
ECLASS 4.0
27260700
ECLASS 6.0
27260700
UNSPSC 6.01
30211810
UNSPSC 12.01
39121409

Product condition