1529742 Phoenix Contact Electrical Connectors

1529742 Product Details

• Length of cable
  0.5 m
• Rated voltage
  48 V AC
• Standards/regulations
  M12 connector IEC 61076-2-101
• Insertion/withdrawal cycles
  > 100
• Torque
  3 Nm ... 4 Nm (Installation-side)
• Standards/specifications
  M12 connector IEC 61076-2-101
• Flame resistance
  according to VDE 0472, Part 4, test type B
• ECLASS 4.0
  27140800
• ECLASS 9.0
  27060311
• ETIM 4.0
  EC000830
• UNSPSC 19.0
  31251501
• UNSPSC 20.0
  31251501
• Ambient temperature (operation)
  -40 °C ... 80 °C (cable, fixed installation)
• Rated surge voltage
  1.5 kV
• Status display
  No
• Contact material
  CuZn
• Safety note
  WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 6.0
  27279200
• ETIM 6.0
  EC001855
UNSPSC 11
31251501
Degree of protection
IP67
Number of positions
5
Overvoltage category
II
Contact carrier material
PA 6.6
Sealing material
NBR
Conductor cross section
3x 2x 0.22 mm²
Wire colors
Green-yellow, white-brown, gray-pink
Number of bending cycles
5000000
Traversing rate
1.6 m/s
Conductor material
Bare Cu litz wires
ECLASS 11.0
27060311
ECLASS 4.1
27140800
UNSPSC 21.0
31251501
Note
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
Insulation resistance
≥ 5 GΩ*km
Signal type/category
INTERBUS
Degree of pollution
3
Flammability rating according to UL 94
V0
Cable type
INTERBUS
ECLASS 10.0.1
27060311
ECLASS 7.0
27279218
UNSPSC 13.2
39121413
Rated current at 40°C
4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
Coding
B - inverse
Test voltage
2500 V
Shielded
yes
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27143400
ECLASS 5.0
27143400
Twisted pairs
2 cores to the pair
External sheath, color
may green RAL 6017
Contact surface material
Ni/Au
AWG signal line
24
Overall twist
3 pairs to the core
Minimum bending radius, fixed installation
7.5 x D
Outer sheath, material
PUR
Signal speed
0.66 c
Coupling resistance
< 250.00 mΩ/m (at 30 MHz)
UNSPSC 6.01
31251501
Cable structure
3 x 2 x 0.22 mm²
Shielding
Braided copper wires
External cable diameter D
8 mm
Traversing path
10 m
Loop resistance
≤ 159.80 Ω/km
Cable capacity
≤ 60 nF/km (At 800 Hz)
Nominal voltage, cable
250 V (Peak value, not for high-power applications)
ETIM 2.0
EC001297
ETIM 7.0
EC001855
UNSPSC 12.01
31251501
Material, knurls
Nickel-plated brass
Cable type (abbreviation)
900
Conductor structure signal line
32x 0.10 mm
Minimum bending radius, flexible installation
15 x D
Bending radius
120 mm
Material conductor insulation
PE
Wave impedance
120 Ω ±20 % (at 64 kHz)
Near end crosstalk attenuation (NEXT)
≥ 61 dB (at 772 kHz)
Test voltage Core/Core
1500 Vrms
ETIM 3.0
EC002061
Acceleration
3.2 m/s²
Cable weight
70 kg/km
Attenuation
≤ 15 dB/km (at 256 kHz)
Test voltage Core/Shield
1000 Vrms
UNSPSC 7.0901
31251501

Product condition