1528549 Phoenix Contact Electrical Connectors

1528549 Product Details

• Degree of protection
  IP67
• Number of positions
  4
• Signal type/category
  Ethernet CAT5 (IEC 11801), 100 Mbps
• Test voltage
  2500 V
• Sealing material
  NBR
• Cable type
  Ethernet flexible CAT5, 2-pair
• AWG signal line
  26
• Length of cable
  5 m
• Rated voltage
  48 V AC
• Standards/regulations
  M12 connector IEC 61076-2-101
• Transmission characteristics (category)
  CAT5
• Contact material
  CuZn
• Material, knurls
  Nickel-plated brass
• Cable type (abbreviation)
  93E
• Core diameter including insulation
  0.98 mm
• External cable diameter D
  6.4 mm ±0.2 mm
• Outer sheath, material
  PUR
• Conductor material
  Bare Cu litz wires
• Near end crosstalk attenuation (NEXT)
  65.3 dB (with 1 MHz)
• Current carrying capacity of cable
  2 A (according to DIN VDE 0891-1)
Ambient temperature (installation)
-20 °C ... 80 °C
ECLASS 10.0.1
27440102
ECLASS 5.0
27143400
UNSPSC 6.01
31251501
UNSPSC 11
31251501
UNSPSC 20.0
39121413
Ambient temperature (operation)
-40 °C ... 80 °C (cable, fixed installation)
Coding
D - data
Flammability rating according to UL 94
V0
Contact carrier material
PA 6.6
Conductor cross section
2x 2x 0.14 mm²
Overall twist
Two pairs with two fillers to the core
Tensile strength GRP
≤ 80 N
Power-summated near end crosstalk attenuation (PSNEXT)
62.3 dB (with 1 MHz)
Cable capacity
approx. 45 nF/km (at 1 kHz)
Nominal voltage, cable
≤ 100 V (Peak value, not for high-power applications)
Shielded
yes
ECLASS 11.0
27440102
ETIM 6.0
EC002061
ETIM 2.0
EC001297
UNSPSC 12.01
31251501
UNSPSC 19.0
39121413
Note
The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences ari
Insulation resistance
≥ 500 MΩ*km
Overvoltage category
II
Degree of pollution
3
Standards/specifications
Electrical requirements EN 50288-2-2
Conductor structure signal line
7x 0.16 mm
Outer sheath thickness
1.2 mm
Minimum bending radius, flexible installation
8 x D
Return loss (RL)
23 dB (at 4 МHz)
Flame resistance
according to IEC 60332-1-2
Test voltage Core/Shield
700 V (50 Hz, 1 min.)
Ambient temperature (storage/transport)
-20 °C ... 80 °C
ECLASS 5.1
27143400
ECLASS 6.0
27279200
ETIM 3.0
EC002061
UNSPSC 21.0
39121413
Cable structure
2x2xAWG26/7; SF/UTP
Wire colors
white/orange-orange, white/green-green
External sheath, color
water blue RAL 5021
Minimum bending radius, fixed installation
4 x D
Material conductor insulation
Foamed PE
Halogen-free
according to IEC 60754-1
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27140800
ECLASS 9.0
27440102
ETIM 4.0
EC002062
UNSPSC 13.2
39121413
Cable weight
42 kg/km
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27140800
ECLASS 7.0
27440103
UNSPSC 7.0901
31251501
UNSPSC 18.0
39121413
UL AWM style
20963 (80°C/30 V)
Attenuation
3.2 dB (with 1 MHz)
Contact surface material
Ni/Au
Safety note
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Twisted pairs
2 cores to the pair
Rated current at 40°C
4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
Shielding
Aluminum-coated foil, tinned copper braided shield
Loop resistance
≤ 290.00 Ω/km
Optical shield covering
70 %
Wave impedance
100 Ω ±5 Ω (at 100 MHz)
Coupling resistance
≤ 100.00 mΩ/m (at 10 MHz)
Test voltage Core/Core
700 V (50 Hz, 1 min.)
Status display
No
Signal runtime
5.3 ns/m
Resistance to oil
according to EN 60811-2-1

Product condition